Water Lubricant (WL) vertical turbine pumps

expired opportunity(Expired)
From: Federal Government(Federal)
W912DW22Q0018

Basic Details

started - 11 May, 2022 (22 months ago)

Start Date

11 May, 2022 (22 months ago)
due - 25 May, 2022 (22 months ago)

Due Date

25 May, 2022 (22 months ago)
Bid Notification

Type

Bid Notification
W912DW22Q0018

Identifier

W912DW22Q0018
DEPT OF DEFENSE

Customer / Agency

DEPT OF DEFENSE (698364)DEPT OF THE ARMY (131634)USACE (37553)NWD (6827)US ARMY ENGINEER DISTRICT SEATTLE (1091)
[object Object]

SetAside

SBA(Total Small Business Set-Aside (FAR 19.5))
unlockUnlock the best of InstantMarkets.

Please Sign In to see more out of InstantMarkets such as history, intelligent business alerts and many more.

Don't have an account yet? Create a free account now.

GENERAL INFORMATION:The U.S. Army Corps of Engineers requires two (2) Water Lubricant (WL) vertical turbine pumps to be delivered to Albeni Falls Dam in Oldtown, Idaho.SPECIFICATIONS:Contract is for purchase of two (2) WL vertical turbine pump assemblies. The new vertical turbine pumps will replace existing unwatering pumps shown in appendix A. The pump and motor assemblies shall meet or exceed this requirement as specified and shall have the following minimum salient characteristics:Performance Characteristics:3500 GPM flow rate at 60 Ft headWL applicationMotors:75 HP1800 RPM nominalNEMA 365TP Frame DesignationVertical hollow shaft with non-reverse ratchet3PH, 460 VAC nominalWP1 EnclosureNEMA Premium Efficiency RatingPumps:79’ - 4-1/2” total pump lengthBottom of base plate flange to center line of pump discharge shall be 11”Center line of pump shaft to discharge flange face shall be approximately 13.75”12” Flanged discharge connectionSteel Fabricated F Style discharge head16-1/2”
Head Bolt Diameter416 Stainless Steel Head Shaft 1.25” x 37.25” nominal dimensionsSelf-lubricating packing box bearing such as Glide 400 polymerPolymer lantern ring and stainless-steel spilt packing followerHigh-tensile strength abrasion-resistant packing such as John Crane 134512” x 0.375” threaded steel pump column416 stainless steel line shaft, 1.25” – 12 TPIShaft guard assembly316 Stainless steel bearing spidersSelf-lubricating column – shaft bearings such as Glide 400 polymerSingle stage pump bowlSelf-lubricating bowl bearings such as Glide 400 polymer416 Stainless steel bowl shaft at 2.1875” nominalStainless steel impeller18-8 or 316 stainless steel fasteners304 or 316 stainless steel bolts on basket strainerFoundation Plate, two (2) required32” x 32” x 7/8” thick steelNo holes for steel to concrete connectionBase hole diameter, bolt diameter and tapped bolt holes in foundation plate shall match pump baseDrill tapped bolt holes to time pump discharge flange parallel with 1 edge of foundation plateDresser Couplings, two (2) requiredDresser 12" Style 38 coupling for cast iron/steel pipe or equal.SUBMITTALS:Pump and motor performance curveTwo (2) Pump and motor dimensional printsParts listProduct dataFour (4) Hard copies and one (1) digital copy of O&M manualsACCEPTANCE OF MATERIALS:Materials will be inspected at the delivery point prior to acceptance. Contractor shall be responsible for maintaining the product’s condition as specified until the point of acceptance. New equipment only; no remanufactured or “gray market” items.DELIVERY SCHEDULE:The successful bidder shall be required to deliver the two (2) WL vertical turbine pump assemblies to Albeni Falls Dam on or before 1 September 2022.  Contractor is responsible for downloading from truck. All deliveries must take place during AFD business hours of Monday through Thursday 7:00 am – 4:00 pm, excluding Federal holidays.DELIVERY LOCATION: Item shall be delivered FOB DESTINATION to the following address:US Army Corps of EngineersATTN: Ben PuyleartAlbeni Falls Dam2376 E. Hwy 2Oldtown, ID 83822APPENDIX A Existing Dewatering Pumps:The two dewatering pump motors are vertically mounted Fairbanks-Morse AC induction underdrive motors type QZO.  These motors are rated at 75 horse power continuous.  3 phase. 220 / 440 volt. 178A / 89A.  Full load 1755 RPM.  24 hour, 50 degree C rise. Frame 2045PV.  The two dewatering pumps are Fairbanks-Morse Figure 6972 Deep well pumps with a rated capacity of 3,500 GPM at 60 feet of head and a maximum pump speed of 1,760 RPM.  The pumps have an efficiency rating (min.) of 75% at rated operating point.

,
  83822  USALocation

Place Of Performance : N/A

Country : United StatesState : IdahoCity : Oldtown

You may also like

240000900839,RFQ,86,1 - PLUG-IN UTILITY PUMP AND WATER DISCHARGE HOSE

Due: 02 Apr, 2024 (in 4 days)Agency: City of Los Angeles

240000900839,RFQ,86,1 - PLUG-IN UTILITY PUMP AND WATER DISCHARGE HOSE

Due: 02 Apr, 2024 (in 4 days)Agency: Los Angeles International Airport

240000900568,RFQ,40,1 - PUMP, CONCRETE PUMP, RENTAL

Due: 10 Apr, 2024 (in 12 days)Agency: City of Los Angeles

Please Sign In to see more like these.

Don't have an account yet? Create a free account now.

Classification

naicsCode 333914Measuring, Dispensing, and Other Pumping Equipment Manufacturing
pscCode H243Equipment and Materials Testing: Pumps and Compressors