56--Base Support Section Tools and Material

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is Campbell5SFGNJR003 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 321113 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids.The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at

href="https://marketplace.unisonglobal.com" target="_blank">https://marketplace.unisonglobal.com, will end on:2022-01-26 13:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.FOB Destination shall be Fort Campbell, KY 42223The MICC End User requires the following items, Brand Name or Equal, to the following:LI 001: Band Saw with Stand and Work Light, 9.5 AMP, 14 inch, 2-Speed, 1, EA;LI 002: Corded Planer, 24 inch Thickness, 1, EA;LI 003: Brushless Cordless Oscillating Tool, 20 Volt MAX, Lithium Ion, 1, EA;LI 004: Drywall Cut-Out Tool, 20 Volt MAX, Lithium-Ion, Cordless, 1, EA;LI 005: Engineering Sledge Hammer, 4 lbs with 12.2 inch Fiberglass Handle, 1, EA;LI 006: Sledge Hammer, 12 lbs with 33.3 inch Fiberglass Handle, 1, EA;LI 007: Rubber Mallet, 16 oz, 2, EA;LI 008: Laser Etched Framing Square, 16" x 24", 2, EA;LI 009: Speed Square with Speed Clip, 7 inch, 2, EA;LI 010: Forged Half Round Handy Bar, 15 inch, 2, EA;LI 011: Claw Bar, 10 inch, 1, EA;LI 012: Thru-Tang Chisel Set (6 piece set), 1, SET;LI 013: 4.8 AMP 8 in. Bench Grinder w/ LED Work Light and Quenching Tray, 1, EA;LI 014: Mechanic Tools Kit and Socket Set, 200-230 Piece Set, 1, SET;LI 015: 6 in. Trigger Clamp, 4, EA;LI 016: 4.5 in. Trigger Clamp, 2, EA;LI 017: Steel Sawhorse and Jobsite Table – 1100 lb. Capacity, 4, EA;LI 018: 6 cu. ft. Wheel Barrow w/ Steel Handles and Flat Free Tire, 1, EA;LI 019: 30 in. Magnetic Sweeper w/ Handle Release, 1, EA;LI 020: #18 Polypropylene Twisted Mason Twine, White. NOTE requested amount is in FEET. IE One roll of #18 twine containing no less that 750 FT meets the requirement., 750, FEET;LI 021: Stud Finder, Zircon HD900c - or equal, 1, EA;LI 022: Compact Chalk Reel Kit w/ Red Chalk, 1, EA;LI 023: 20 Volt 5.0 Amp Hour Lithium-Ion Battery - DeWalt or equal, 4, EA;LI 024: 20 Volt 4.0 Amp Hour Lithium-Ion Battery - Porter Cable or equal, 4, EA;LI 025: 20 Volt 1.3 Amp Hour Lithium-Ion Battery - Porter Cable or equal, 4, EA;LI 026: 48 in. Drywall T-Square, 1, EA;LI 027: Red Marking Chalk, 32, OZ;LI 028: 21 Piece Drill Bit Set for Metal Wood and Plastic, 1/16 in. to 1/2 in., 1, SET;LI 029: 10 in. x 60-teeth Fine Finish Saw Blade, 1, EA;LI 030: T-Shank Jig Saw Blade Set, 1, SET;LI 031: 6 1/2 in. x 24-Teeth Tracking Point Framing Saw Blade, 2, EA;LI 032: Wood and Metal Reciprocating Saw Blade Set (10 Piece), 1, SET;LI 033: 2 Story Rolling Scaffold Tower, 1000lb Load capacity, 11 Foot Platform Height. Pro-Series Model #800364 or equal, 1, EA;LI 034: Rolling Scaffold Tower, 1100lb Load capacity. 75 inch Height. Metaltech Model #I-CISCMT or equal, 1, EA;LI 035: Sliding Digital T-Bevel, 8 inch, General Tools Model 828 or equal, 1, EA;LI 036: Conduit Bender, 1-1/4 EMT, 1, EA;LI 037: Electricians Tool Kit, Kipper Tool Kit ELS1000-R NSN: 5180-01-461-8105 - or equal, 1, SET;LI 038: Digital Circuit Breaker Finder Took Kit (2-Piece), 90-120 Volt, Klein Tools ET310 or equal, 2, EA;LI 039: Replacement Blade for BX and Armored Cable Cutters, 20, EA;LI 040: 400 Amp Digital Clamp Meter, 2, EA;LI 041: In-Sure 4-Port Connector - or equal NOTE requesting 200 total connectors, ie 4x Packages of 50 connectors, , or combinations thereof will be accepted., 200, EA;LI 042: In-Sure 3-Port Connector - or equal NOTE requesting 200 total connectors, ie 4x Packages of 50 connectors, or combinations thereof will be accepted., 200, EA;LI 043: 1000V Insulated Tool Kit, 5-Piece, Klein Tools Model 94130 or equal, 2, SET;LI 044: 5KV Rubber Insulated Gloves, 2, PAIR;LI 045: 3/8" Armored Cable Connectors, 200, EA;LI 046: 12 Ton Hydraulic Pipe Bender, 1, EA;LI 047: Insulated Needle-Nose Pliers, 2, EA;LI 048: Cable Connector Wire Twisting Tool, 3, EA;LI 049: 1-Gang Gray Plastic New Work Standard Rectangular Interior Electrical Box, 25, EA;LI 050: BH234 2-Gang Blue Plastic Old Work Standard Switch/Outlet Wall Electrical Box, 15, EA;LI 051: 15-Amp Residential Duplex Outlet, 15, EA;LI 052: 15-Amp Single-Pole Toggle Light Switch, 15, EA;LI 053: 15-Amp 3-Way Toggle Light Switch, 7, EA;LI 054: 1-Gang White Toggle Standard Wall Plate, 15, EA;LI 055: 2-Gang White Toggle Standard Wall Plate, 15, EA;LI 056: 2-Gang Square Metal Electrical Box Cover, 20, EA;LI 057: 1-Gang Gray Metal New Work/Old Work Standard Octagonal Ceiling/Wall Electrical Box, 10, EA;LI 058: 2-Gang Gray Metal New Work Standard Square Ceiling/Wall Electrical Box, 10, EA;LI 059: 2-Gang Square Metal Electrical Box Cover, 30, EA;LI 060: 200-Amp 30-Spaces 60-Circuit Main Breaker Plug-On Neutral Load Center, 1, EA;LI 061: 125-Amp 12-Spaces 24-Circuit Convertible Main Lug Plug-On Neutral Load Center, 2, EA;LI 062: Sweetbriar 4/0-4/0-2/0 Aluminum Urd Service Entrance Cable - or equal, 20, FEET;LI 063: 1/2 inch Flexible Metal Conduit Straps, 200, EA;LI 064: EMT 1⁄2 in One Hole Strap, 100, EA;LI 065: EMT 1⁄2 Set Screw Coupling, 30, EA;LI 066: 1-in Die Cast Zinc Clamp-on Type Service Entrance Connector Conduit Fittings, 28, EA;LI 067: EMT 1⁄2 Set Screw Box Connector, 50, EA;LI 068: 9/16-in Metal Insulated Cable Staple, 350, EA;LI 069: Armored flex cable 12/2, 50, FEET;LI 070: Romex SIMpull 10/3 Solid Non-Metallic Wire - or equal, 60, FEET;LI 071: Romex SIMpull 12/2 Solid Non-Metallic Wire - or equal, 100, FEET;LI 072: Romex SIMpull 12/3 Solid Non-Metallic Wire - or equal, 100, FEET;LI 073: 250 volt 660 watt Ceiling Socket with E26 Screw Base, 10, EA;LI 074: 12 Gauge Stranded Wire Black, 100, FEET;LI 075: 12 Gauge Stranded Wire White, 100, FEET;LI 076: 12 Gauge Stranded Wire Ground, 100, FEET;LI 077: 5/8-in Bronze Grounding Clamp Conduit Fittings, 6, EA;LI 078: 6-Gauge Solid Soft Drawn Copper Bare Wire, 25, FEET;LI 079: 20 Volt 5.0 Amp Hour Lithium-Ion Battery - Milwaukee Brand or equal, 2, EA;LI 080: 5/8-in Bronze Grounding Clamp Conduit Fittings, 6, EA;LI 081: 36" expandable bar clamp - Jorgensen E-Z Hold or equal, 6, EA;LI 082: 48" bar clamp - Jorgensen or equal, 6, EA;LI 083: 90 degree corner clamp - Kreg or equal, 4, EA;LI 084: 7-1/4" 68- tooth carbide sircular saw - Irwin or equal, 2, EA;LI 085: CNC Router, 29.5"x29.5"x4.5" work area, 1.25 hp motor. Inventables X Carve CNC Router or equal, 1, EA;LI 086: 6x6x12 pressure treated, 30, EA;LI 087: 1x4x8 white furring strip, 300, EA;LI 088: 1x2x8 white furring strip, 200, EA;LI 089: 1/4 in. x 4ft. X 8ft. Pine Plywood, 200, EA;LI 090: 1x6x8 unfinished pine board, 300, EA;LI 091: 3 inch deck screws, 75, LBS;LI 092: 2x4x8 ww select stud, 500, EA;LI 093: 1/4x4x8 maple sanded plywood, 20, EA;LI 094: 3" polyurethane swivel caster - or equal, 20, EA;LI 095: #10 3/4 socket hex drive sheet metal screws NOTE TOTAL requested amount is for 450 screws., 450, EA;LI 096: 3/8-16 x 5 inch Carriage Bolt, 200, EA;LI 097: 3/8-16 x 9 inch Carriage Bolt, 75, EA;LI 098: 1/2 inch x 2 1/2 inch Galvanized Lag Screw, 200, EA;LI 099: 1/2 inch x 5 inch Galvanized Lag Screw, 75, EA;LI 100: 1/2 inch x 4 inch Galvanized Lag Screw, 200, EA;LI 101: 3 1/2 inch Deck Screws (5 Pounds), 5, LBS;LI 102: 2 1/2 inch Deck Screws (5 Pounds), 5, LBS;LI 103: 2 inch Deck Screws, 10, LBS;LI 104: 3/4"x 10' Schedule 80 PVC Pipe, 10, EA;LI 105: 3/4" Rigid Type LB Threaded Aluminum Conduit Body, 5, EA;LI 106: 3/4"x 3/4" Schedule 80 Coupling PVC Fitting, 10, EA;LI 107: 3/4" Schedule 80 PVC Female Adapter, 5, EA;LI 108: 3/4" EMT Compression Coupling, 25, EA;LI 109: 2-Gang Square Metal Electrical Box Cover (Duplex&GFCI), 5, EA;LI 110: 1-Gang Toggle Wall Plate, 5, EA;LI 111: 12 AWG Solid Green Copper THHN, 500, FEET;LI 112: 12 AWG Solid Black Copper THHN, 500, FEET;LI 113: 12 AWG Solid White Copper THHN, 500, FEET;LI 114: 2-Gang Square Metal Electrical Box Cover (Duplex), 5, EA;LI 115: 3.5 cu. Ft. Commercial Grade Residential Agitator Top Load Washer, Maytag Model MVWP576KW or equal, 1, EA;LI 116: 7.4 cu. Ft. Commercial Grade Residential Vented Electric Dryer, Maytag Model MEDP576KW or equal, 1, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable.No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award.Reporting During Contract PerformanceEqual Opportunity