BOAT LAUNCH SIGNS

 Reference NumberMB-MBPB-12U-00206 Solicitation Number12U0027291 Organization NameManitoba Finance
Procurement Services Branch
 Source IDPV.MN.MB.498.C6 Associated ComponentsYes  Published2020-01-21 Revised Closing2020-02-03 12:00 PM   CategoryFabricated Materials
 GSINSN9905: SIGNS AND IDENTIFICATION PLATES
 Region of Delivery Region of Opportunity Agreement Type Tender TypeInvitation to Tender (ITT) Estimated Value Solicitation Method  
BOAT LAUNCH SIGNS ISSUING DEPARTMENT: Procurement Services Branch
DATE ISSUED: 21/01/2020
ISSUED BY: J Youdeowei
TELEPHONE: 204 945-6346
THE FOLLOWING IS A REQUEST FOR SUPPLY OF BOAT LAUNCH SIGNAGE FOR
AGRICULTURE AND RESOURCE DEVELOPMENT.
CONTACT: JOSEPHINE YOUDEOWEI
PHONE: (204)945-6346
Please contact the individual noted above if additional information or
clarification is required on the following items.
Bidder to indicate if you are able to meet the requested
delivery

date of March 01, 2020:
Yes ____ OR No ____.
If NO, then indicate a realistic delivery as follows:
Delivery in ___ working days or ____weeks from receipt of the order.
ASSOCIATED COMPONENTS:
The Request for Quotation documents are now "free-of-charge" and can be
downloaded from MERX. The official MERX document will be considered a
valid bid. Printed abstracts from the MERX website will not be accepted
and rejected. To obtain the official RFQ document please follow the
"Associated Components: Preview/Order" link at the top of this page.
GENERAL TERMS & CONDITIONS:
Bidders must "login" to MERX to access the General Terms & Conditions
which apply to this RFQ, in addition to those shown below. After
"login" follow the links: Information -> Government Publications ->
Manitoba Terms and Conditions -> Request for Quotation.
SUBMISSION TERMS AND CONDITIONS
The Bid MUST be signed by a representative of the Bidder with the
authority to bind the Bidder. The name and title of the representative
signing the Bid should also be printed below their signature.
Bids MUST be received at the Submission Address no later than the
closing date and time.
SUBMISSION BY MAIL OR DELIVERY: Bids should be submitted in a sealed
envelope and sent by mail or delivered personally, or by courier to the
Submission Address. The envelope should be clearly marked with the
solicitation number, the closing date and time and the Bidder's name and
return address.
ELECTRONIC SUBMISSION (BY EMAIL OR FAX): Bids submitted by email should
include the solicitation number and the Bidder's name in the subject
line and should be sent in PDF format. Emails approaching 40 Megabytes
in size may be rejected by Manitoba's email system. Upon submitting a
Bid by email, Bidders will receive a reply email confirming that
Manitoba has received the Bid. Bidders not receiving a reply email
should contact Procurement Services Branch at 204-945-6361.
While Manitoba may allow for electronic bid submissions, the Bidder
acknowledges that electronic bid submissions are inherently unreliable.
The Bidder bears all risk associated with submitting its Bid by
electronic submission, including but not limited to delays in
transmission between the Bidder's computer or fax machine and Manitoba's
email system or fax machine.
It is the Bidder's sole responsibility to ensure that their Bid and all
attachments are received at the Submission Address before the closing
date and time. Bids received after the closing date and time will be
rejected.
Vendor's e-mail address: (if available) ____________________
Quantity clarification - quantity listed contains 2 or 3 decimals.
_________________________________________________________________________
ITEM QTY DESCRIPTION DELIVERY
NO. DATE
========================================================
ITEM 10 01/03/2020
25.00 Each GSIN: N9905MATERIAL: 69936
SIGN, BOAT LAUNCH/WATER ACCESS, MEDIUM, 24 INCH W X 30 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, THREE PRE-DRILLED HOLES LOCATED
NEAR THE TOP, MIDDLE AND BOTTOM OF THE SIGN IN THE CENTRE OF THE SIGN
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 1 CENTRE
(U-CHANNEL OR WOODEN) POST, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
ENGLISH
MEDIUM, 24" W X 30" H BOAT LAUNCH SIGNS (ENGLISH)
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 20 01/03/2020
75.00 Each GSIN: N9905MATERIAL: 69935
SIGN, BOAT LAUNCH/WATER ACCESS, MEDIUM, 24 INCH W X 30 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, THREE PRE-DRILLED HOLES LOCATED
NEAR THE TOP, MIDDLE AND BOTTOM OF THE SIGN IN THE CENTRE OF THE SIGN
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 1 CENTRE
(U-CHANNEL OR WOODEN) POST, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
ENGLISH, REFLECTIVE
MEDIUM, 24" W X 30" H BOAT LAUNCH SIGNS (ENGLISH)
REFLECTIVE
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 30 01/03/2020
10.00 Each GSIN: N9905MATERIAL: 69938
SIGN, BOAT LAUNCH/WATER ACCESS, MEDIUM, 24 INCH W X 30 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, THREE PRE-DRILLED HOLES LOCATED
NEAR THE TOP, MIDDLE AND BOTTOM OF THE SIGN IN THE CENTRE OF THE SIGN
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 1 CENTRE
(U-CHANNEL OR WOODEN) POST, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
FRENCH
MEDIUM, 24"W X 30"H BOAT LAUNCH SIGNS (FRENCH)
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 40 01/03/2020
15.00 Each GSIN: N9905MATERIAL: 69937
SIGN, BOAT LAUNCH/WATER ACCESS, MEDIUM, 24 INCH W X 30 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, THREE PRE-DRILLED HOLES LOCATED
NEAR THE TOP, MIDDLE AND BOTTOM OF THE SIGN IN THE CENTRE OF THE SIGN
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 1 CENTRE
(U-CHANNEL OR WOODEN) POST, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
FRENCH, REFLECTIVE
MEDIUM, 24"W X 30"H BOAT LAUNCH SIGNS (FRENCH)
REFLECTIVE
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 50 01/03/2020
85.00 Each GSIN: N9905MATERIAL: 69940
SIGN, BOAT LAUNCH/WATER ACCESS, LARGE, 38 INCH W X 24 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, A PAIR OF THREE PRE-DRILLED
HOLES LOCATED NEAR THE ENDS OF THE SIGN, AT THE TOP, MIDDLE AND BOTTOM
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 2 CENTRE
(U-CHANNEL OR WOODEN) POSTS, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
ENGLISH
LARGE, 38"W X 42"H BOAT LAUNCH SIGNS (ENGLISH)
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 60 01/03/2020
155.00 Each GSIN: N9905MATERIAL: 69939
SIGN, BOAT LAUNCH/WATER ACCESS, LARGE, 38 INCH W X 42 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, A PAIR OF THREE PRE-DRILLED
HOLES LOCATED NEAR THE ENDS OF THE SIGN, AT THE TOP, MIDDLE AND BOTTOM
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 2 CENTRE
(U-CHANNEL OR WOODEN) POSTS, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
ENGLISH, REFLECTIVE
LARGE, 38"W X 42"H BOAT LAUNCH SIGNS (ENGLISH)
REFLECTIVE
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 70 01/03/2020
20.00 Each GSIN: N9905MATERIAL: 69942
SIGN, BOAT LAUNCH/WATER ACCESS, LARGE, 38 INCH W X 24 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, A PAIR OF THREE PRE-DRILLED
HOLES LOCATED NEAR THE ENDS OF THE SIGN, AT THE TOP, MIDDLE AND BOTTOM
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 2 CENTRE
(U-CHANNEL OR WOODEN) POSTS, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
FRENCH
LARGE, 38"W X 42"H BOAT LAUNCH SIGNS (FRENCH)
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
ITEM 80 01/03/2020
25.00 Each GSIN: N9905MATERIAL: 69941
SIGN, BOAT LAUNCH/WATER ACCESS, LARGE, 38 INCH W X 24 INCH H, ALUMINUM
(2 MM .081 THICKNESS), ROUNDED CORNERS, A PAIR OF THREE PRE-DRILLED
HOLES LOCATED NEAR THE ENDS OF THE SIGN, AT THE TOP, MIDDLE AND BOTTOM
PER DEPARTMENT SPECIFICATIONS TO ACCOMMODATE POSTING ON 2 CENTRE
(U-CHANNEL OR WOODEN) POSTS, GRAPHICS FULL COLOUR USING UV INKS, 5 YEAR
PROTECTIVE UV AND ANTI-GRAFFITI COATING, SIGN DESIGN TO BE PROVIDED,
FRENCH, REFLECTIVE
LARGE, 38"W X 42"H BOAT LAUNCH SIGNS (FRENCH)
REFLECTIVE
Please indicate:
If Item Specification offered is exactly as requested above:
YES _______ or NO ______
Advise information on the product offered as follows:
Manufacturers Name________________________________
Brand Name________________________________________
Product / Style Number ___________________________
Bidder's catalogue/reference number (if applicable)
_________________________
========================================================
NOTE:
REQUIRES AT LEAST 48 HOURS ADVANCE NOTICE OF DELIVERY.
DURING BUSINESS HOURS (MON-FRI. 9 AM - 4PM) PRIOR TO DELIVERY TO
WAREHOUSE.
SUCCESSFUL BIDDER(S) WILL PRODUCE SIGNS IN FRENCH AND ENGLISH AS PER
TENDER.
NOTE:
PLEASE DO NOT PROVIDE SAMPLES OR STRIP SAMPLES WITH
If required, you may be requested to submit a sample or samples of any
alternative products offered, for evaluation prior to the award of the
contract.
The sample or samples are to be provided at no cost to the Manitoba
Government (Manitoba) and may be tested up to and including destruction.
Failure to provide an acceptable sample when requested, may cause
rejection of your quote.
Sample will be returned upon request of bidders at no cost to Manitoba
packed in bundles of 10 with a protective sheet added to protect the top
sign from damage incurred in transport or storage.
the company's logo not be put on the sign #including the back as I have
found with the remaining signs I have, the company's logo has
transferred to the front of another sign when they are bundled and it
cannot be removed.
Aluminum (0.064 thickness) di-bond # essentially the signs have an
aluminum front and back with a di-bond (black plastic-like substrate)
sandwiched in the middle.
Please contact Candace Parks at least 48 hours notice during regular
business hours prior to delivery in order to make arrangement to deliver
signs to the provincial warehouse on located at Whyte Avenue in
Winnipeg.
QUOTATION EVALUATION:
Generally the lowest overall price of an acceptable item(s) in
accordance with the terms & conditions of the RFQ will be
awarded the order.
Quotations will be evaluated based on suitability of unit offered
compared to the end users needs, product specifications, delivery,
warranty, price, quality of the bidder's performance in past awards and
any other terms & conditions indicated on this RFQ.
Failure to provide adequate information to evaluate the item offered may
be cause for rejection of your quote by the Manitoba Government
(Manitoba). Suitability selection to be at Manitoba's sole discretion.
If any of the above items/features are accessories they are to be
included and installed prior to delivery
ALTERNATIVE PRODUCTS
Bidders to quote on products exactly as specified above, if possible.
Bidders wishing to quote an alternative brand/product should, if
possible, have the alternative approved by the using department prior to
submitting your quote.
Supplier catalogue numbers, if shown, are for reference.
If additional information is required and/or for approval of alternative
products please call the Departmental Contact at the phone number
indicated above.
Illustrated literature and manufacturers name and product
number as well as your product reference number (if applicable) to be
shown for each item offered must be provided with bid submission.
Any alternative product offered which has not been evaluated and
approved might not be accepted for this quote.
PRODUCT OFFERED
Any product offered may require testing prior to acceptance.
Any product offered must be new, first quality.
The product offered must meet the requirements and expectations for its
intended use
If it is your intention to offer an item, which does not meet all the
specs/description as outlined, then you must indicate all intended
deviations or changes on the return quote.
QUALITY / ACCEPTABILITY
Any product supplied must be new, unused, first quality.
All goods delivered are subject to inspection prior to delivery
acceptance. Signing of any delivery slip should not be construed as
acceptance of the product delivered. Manitoba reserves the right to
reject any product, after final inspection that does not meet the
specification or product description requested.
Manitoba reserves the right to reject any product supplied which, upon
inspection or use, is deemed by the using department to be unacceptable
for their intended use.
Products to be supplied as specified on the contract/purchase order.
Any substitutes shipped without prior written approval will be rejected
at time of delivery or held at shipper's risk pending return
instructions Products rejected by the using department will be returned
to the Vendor for full credit or replacement product at no cost to
Manitoba or the contract may be cancelled.
DELIVERY
F.O.B. DESTINATION FREIGHT PREPAID DELIVERED TO WINNIPEG, MB
(unit prices include all necessary charges e.g. freight, insurance,
handling etc.)
If any charges are not included please explain in detail any/all charges
which will be extra to the unit prices quoted and will be charged on the
invoice.
INSPECTION:
Final inspection and acceptance or rejection of the goods will be made
promptly as practicable, but failure to inspect and accept or reject
goods promptly does not mean that the Manitoba Government has accepted
these goods. The Government of Manitoba reserves the right to inspect
the goods for up to 90 days after the date of delivery.
Partial acceptance of rejection of an order does not release the Bidder
from its responsibility to complete the order.
RETURNS / REFUNDS:
Any product supplied deemed unacceptable by the end-user/customer will
be immediately replaced with new product/unit at no charge to Manitoba.
The bidder shall provide details of their Return/Replacement/Refund
Policy. The Bidder shall identify the exact detail as to what is
covered in terms of responsibility for repair/replacement/refund of
product:
________________________________________________________________
________________________________________________________________
________________________________________________________________
Any/All costs associated with the return/replacement/refund of defective
products will be the responsibility of the vendor.
All defective products are requested to be replaced within five (5)
business days of notification/request. If five (5) business days is not
sufficient time for replacement, the Bidder shall state the number of
days required: ________
MANUFACTURER'S WARRANTY:
Please indicate the warranty for each item offered (if applicable)
years.
Vendors must address warranty issues the next business day.
Please note: During the period of the warranty offered, all labour,
transportation, parts, surcharges including shipping and brokerage will
be included. The Province of Manitoba "will not" pay additional charges
while the item(s) offered are under the above stated warranty.
.
Potential cost associated with the location of warranty service might be
used in the evaluation of this quote.
If the warranty offered is the Vendor's warranty in combination with or
in place of the Manufacturer's warranty then a complete
explanation must be provided.
WARRANTY SERVICE/LOCATION
Is warranty service provided on site at our premises?
Yes___ or No____
If No, Indicate the location the unit must be sent to for
manufacturer's certified and/or approved warranty service
Company name_________________
Location (city & province)____________
Do you have a toll free phone number for warranty service?
Yes______ or No______
IF YES, PLEASE PROVIDE _________________
GOVERNING LAWS
Manitoba requires its suppliers to adhere to provincial labour laws and,
where businesses use sources outside of Canada, Manitoba expects
suppliers to comply with local labour laws in the country of
manufacture.
INDIGENOUS PROCUREMENT INITIATIVE:
Manitoba is committed to community economic development as a key
component of its economic strategy. It intends to develop a provincial
economy that is more inclusive, equitable and sustainable.
Procurement practices are one means that can be used to contribute to
the growth of Indigenous businesses. In that regard, Manitoba developed
the Indigenous Procurement Initiative (IPI). The objective of IPI is to
increase the participation of Indigenous businesses in providing goods
and services to Manitoba.
INDIGENOUS BUSINESS STANDARD:
Indigenous participation is desired but bids will not be disqualified if
there is no Indigenous business participation.
INDIGENOUS BUSINESS DIRECTORY:
Manitoba has established a directory of Indigenous businesses called the
"Indigenous Business Directory". This directory is a list of Indigenous
businesses (including non profit organizations and economic development
corporations) that have self declared as an Indigenous Business meeting
that definition under the IPI. It is neither comprehensive nor
exhaustive but may be a useful resource to identifying Indigenous
businesses for potential partnering or sub-contracting purposes.
Indigenous businesses not listed in the Directory may also be used.
Registration in the Indigenous Business Directory does not guarantee
certification as an Indigenous business, as business status may change;
therefore formal certification is required in the formal tender process.
Indigenous businesses are encouraged to register by contacting
Procurement Services Branch.
For further information on the Indigenous Business Directory<(>,<)>
registration forms and access to a copy of the Indigenous Business
Directory please see the following website:
http://www.gov.mb.ca/finance/psb/api/api bd.html or contact:
Manitoba Finance
Procurement Services Branch
2nd Floor - 270 Osborne Street N.
Winnipeg, Manitoba
General Inquiry Line
Ph.: 204-945-6361
Fax: 204-945-1455
For all other general inquiries related to this tender opportunity,
please contact the name of the individual(s) identified on page one of
this tender document.
TERMINATION
Manitoba may, in its sole discretion, immediately terminate a purchase
order/contract in writing if:
a) the vendor fails to properly fulfill, perform, satisfy and carry out
each and every one of its obligations under the purchase order/contract,
or
b) the vendor fails or refuses to comply with a verbal or written
request or direction from Manitoba within three(3) days of receiving the
request or direction; or
c) the vendor become bankrupt or insolvent or liquidates; or
d) a receiver, trustee or custodian is appointed for the assets of the
vendor, or any partner thereof; or
e) the vendor or any partner thereof makes a compromise, arrangement, or
assignment with or for the benefit of the creditors of the vendor or of
that partner, as the case may be; or
f) the vendor fails to secure or renew any license or permit for the
vendors business required by law; or any such license or permit is
revoked or suspended; or
g) the vendor or any partner, officer or director of the vendor is found
guilty of an indictable offence; or
h )the vendor fails to comply with any law or regulation relating to the
employment of its employees; or
i) the vendor at any time engages in any activities or trade practices
which, in the opinion of Manitoba, are prejudicial to the interests of
Manitoba, or a department or agency thereof; or
j) there is a breach of any provision of the purchase order/contract.
k) the goods provided by the vendor are not according to the contract or
otherwise unsatisfactory; or
l) the services provided by the vendor are unsatisfactory, inadequate,
or are improperly performed; or
m) the vendor has failed to meet the delivery date indicated on the
purchase order/contract or repeatedly failed to meet the delivery lead
time, indicated on the purchase order/contract.
Manitoba may, in its sole discretion, terminate the purchase
order/contract at any time by giving at least 30 days written notice to
the vendor prior to the intended termination date. All purchases by
Manitoba under the purchase order/contract are subject to and expressly
conditional upon the Legislature of Manitoba duly appropriating funds to
the fiscal year in which they are required to be paid. For the
multi-year contracts the RFQ/contract term "fiscal year" means the
period commencing April 1st of one year and ending on March 31st of the
next ensuing year.
PUBLICITY, MEDIA, OFFICIAL ENQUIRIES AND ADVERTISING:
Neither the bidder nor its suppliers/vendors, employees nor consultants
shall make any public statement making reference to, or relating to the
existence or performance of the purchase order/contract in any
advertising, testimonials or promotional material without the prior
written consent of the Province of Manitoba, which shall not be
unreasonably withheld.
The provision of this condition shall apply during the extension of a
purchase order/contract and indefinitely after its expiry or
termination.
CONFIDENTIALITY:
The content of this RFQ and any other information received by the Bidder
relating to the RFQ, gained through the RFQ process or otherwise, is to
be treated in strict confidentiality. The Bidder shall not disclose any
of the information in whole or in part to anyone not specifically
involved in the preparation of the Bidder's quotation, unless written
consent is secured from Manitoba prior to the said disclosure. The
obligation of each Bidder to maintain confidentiality shall survive the
expiration or the acceptance/rejection of their quotation and/or any
resulting Contract/ Agreement(s) to supply the requirements of this RFQ.
INVOICING AND PAYMENT
Subject to the following subsections, in consideration the goods
provided or delivered to the satisfaction of Manitoba, Manitoba shall
pay the Contractor an amount not exceeding the amount specified in the
successful Contractor's bid submission.
All invoices shall be issued in writing and satisfactory to Manitoba in
both form and content. The contractor shall also provide to Manitoba
such supporting documents, vouchers, statements and receipts as
requested by Manitoba.
Manitoba shall endeavor to pay the Contractor any fees due within 30
days net after the receipt and approval of the invoice and any
supporting materials requested.
VENDOR INFORMATION:
RIGHT TO REISSUE RFQ
Manitoba reserves the right to cancel and/or reissue the RFQ where, in
Manitoba's sole opinion, none of the quotes submitted in response to the
RFQ warrant acceptance or where it would be in the best interests of
Manitoba to do so. Costs incurred in the preparation, presentation and
submission of a quote shall be borne entirely by the Bidder.
Manitoba shall not reimburse any bidders for any costs if the RFQ is
cancelled or reissued.
AUTHORIZED VENDOR:
Manitoba reserves the right, prior to any contract award, to secure
evidence to Manitoba's satisfaction that any bidder is the manufacturer
or an authorized distributor, dealer or retailer of the goods offered
and is authorized to sell these goods in Manitoba, Canada and upon
request will provide Manitoba with written evidence thereof.
COST OF BID
Costs incurred in the preparation, presentation and submission of a Bid
shall be borne entirely by the Bidder.
INVOICING AND PAYMENT
Subject to the following subsections, in consideration the goods
provided or delivered to the satisfaction of Manitoba, Manitoba shall
pay the Contractor an amount not exceeding the amount specified in the
successful Contractor's bid submission.
All invoices shall be issued in writing and satisfactory to Manitoba in
both form and content. The contractor shall also provide to Manitoba
such supporting documents, vouchers, statements and receipts as
requested by Manitoba.
Manitoba shall endeavor to pay the Contractor any fees due within 30
days net after the receipt and approval of the invoice and any
supporting materials requested.
PAYMENT TERMS
Manitoba will consider Early Payment Terms. Manitoba's standard payment
term is net thirty (30) days.
The Bidder shall specify their standard invoice term:
_____________________________
Is there any applicable discounts for early payment?
Yes _____ No _____ Initial __________
If Yes, please specify:
_____________________________________________________
Does your early payment clause appear on your invoice?
Yes _____ No _____ Initial __________
CANADIAN FUNDS
Manitoba prefers to receive quotations in Canadian funds.
If the pricing offered is quoted in a currency other than Canadian then
the currency must be clearly identified on the quote document.
ACCOUNTS RECEIVABLE ADDRESS
Due to our computerized accounts payable system please advise if
your invoice address (accounts receivable) is the same as the address
for orders / quotes shown above.
YES ____ or NO ______
If NO provide complete details i.e. box #, street address, city<(>,<)>
province, postal code, etc.
_________________
MANITOBA'S RETAIL SALES TAX LICENSE
Are you licensed by Manitoba Finance to collect and remit
Manitoba's Retail Sales Tax
YES_____ or NO_____
If NO disregard the following paragraph.
MANITOBA'S RETAIL SALES TAX
Is the product(s) offered subject to Manitoba's Retail Sales Tax
YES____ or NO _____
Proposed Delivery Address:
GOVERNMENT OF MANITOBA WAREHOUSE
1-1383 WHYTE AVE.
R3E 1V7<(>,<)> WINNIPEG MB
TENDERS TO BE RETURNED TO:
Submission Address:
Procurement Services Branch
Manitoba Finance
2nd Flr # 270 Osborne St. N.
Winnipeg, MB, Canada R3 C 1V7
or) Fax to (204) 945-1455
or) Email to bids@gov.mb.ca
   

ItemDescriptionLanguageNo. of PagesFormatNo. of FilesFile SizeAdditional Information
ItemDescriptionLanguageNo. of PagesFormatNo. of FilesFile SizeAdditional Information