WEBBING, TEXTILE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 27 PAGES SPE1C1-24-T-1867 SECTION A (D) Economically disadvantaged women-owned small business under the WOSB Program; or (E) Historically underutilized business zone small business. Procurement History for NSN/FSC:004328179/8305 CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material . 00UF8 SPE1C120V0565P00001 600.000 4.49000 20200918 N 1KNH1 SPE1C118V0060 900.000 4.57000 20171017 N 9J595 SPE1C116M1130 500.000 4.66000 20160413 N 78693 DLA10082C0788 30000.000 0.38000 19820707 N CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 27 PAGES SPE1C1-24-T-1867 SECTION B PR: 7005832997 NSN/MATERIAL:8305004328179 ITEM DESCRIPTION WEBBING,TEXTILE WEBBING,TEXTILE . RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY

REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES INDIVIDUAL NSN DATA . NSN 8305-00-432-8179, PGC11831 . ITEM NAME: ,,WEBBING, TEXTILE PART NUMBER: ,,PIA-W-5664 CAGE CODE: ,,1HHQ4; PARACHUTE INDUSTRY ASSOCIATION, INC. . Shall be in accordance with (IAW) Parachute Industry Association PIA-W-5664C, WEBBING, TEXTILE, ELASTIC dated 11 May 2016. . For use in aviator and ground combat clothing and equipment. . Unit of issue is a YARD (YD). . Design Type: Flat Weight: 0.53 ounces per linear yard maximum Fiber material: Cotton Color: Black Procurement Group Code (PGC): 11831 Thickness: 0.016 inches minimum to 0.046 inches maximum Width: 0.75 inches ± 0.06 (1/16) inches; 0.69 inches minimum to 0.81 inches maximum Type: I (Cotton fiber) Class: 1 Fiberboard Spool Length: 120 yards minimum to 130 yards maximum . Weave construction: The weave for all Types and Classes may be supplied in either shuttle or shuttleless loom construction, except for Type I, Class 4, which shall be manufactured on a shuttleless loom. . The unit of issue is a Yard (YD). . Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulations under the Textile Fiber Products Identification Act. . The textile manufacturer shall properly identify the age of the textile materials by placing a tag on the finished goods or label on the containers identifying the specification to which the material is manufactured, the lot number and the date of manufacture. The date of CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 27 PAGES SPE1C1-24-T-1867 SECTION B manufacture is defined as the date (month and year) of the last manufacturing process that affects the physical characteristics of the material. . WHENEVER REQUESTED BY THE DLA CLOTHING AND TEXTILE PRODUCT SPECIALIST THROUGH THE DLA CLOTHING AND TEXTILE ACQUISITION OFFICER AND/OR THE DLA ACQUISITION SPECIALIST, TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH Revision 1 of the DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS dated August 2021 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED(>,)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT. RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION(>,)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . . RT001: MEASURING AND TEST EQUIPMENT . FED-STD-595C, COLORS USED IN GOVERNMENT PROCUREMENT, AND ALL ASSOCIATED SLASH SHEETS HAVE BEEN CANCELLED (FEBRUARY 14, 2017) AND SUPERSEDED BY SAE AMS-STD-595. ADDITIONAL INFORMATION FOR SAE AMS-STD-595: COPIES OF SAE AMS-STD-595 CAN BE OBTAINED FROM: WEBSITE: STORE.SAE.ORG/EA/ TELEPHONE: 877-606-7323 (INSIDE USA AND CANADA) +1 724-776-4970 (OUTSIDE USA) MAIL: SAE CUSTOMER SERVICE 400 COMMONWEALTH DRIVE WARRENDALE, PA 15096-0001 . . DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS. PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000 . LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. . 52.246-15 CERTIFICATE OF CONFORMANCE . REVIEW OF THIS ITEM HAS DETERMINED THAT THE SPECIFICATIONS, STANDARDS, PRODUCT DESCRIPTIONS OR OTHER TECHNICAL DATA APPLICABLE TO THIS PROCUREMENT ACTION DO NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) OR ODC(S). . CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 27 PAGES SPE1C1-24-T-1867 SECTION B Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing. Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results. Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certification process has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process. In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission. If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial evaluation. The DLA-PTC may ask for additional information or clarifications. If the laboratory survey on file is over 3 years old, a new form will be sent out for the testing facility to fill out. During a contract, the laboratory may be asked to fill out another lab survey when the original survey becomes older than 3 years. Note: The Qualified Laboratories List (QLL) previously maintained by DPSC has been canceled. No testing facility should refer to their previously issued QLL number. Approval. If the testing facility and its named subcontractors meet the capability of the required testing, the DLA-PTC will notify the DLA Troop Support Product Specialist. Once approved by contracting, the testing facility becomes the Place of Performance and is placed in the contract. Disapproval. If a testing facility does not meet the testing capability as per the specifications, the prime contractor is asked to submit another laboratory, and the process starts anew. Note: DLA will require a total of 45 calendar days from the date of the receipt of the request to add a certified testing location to the date the requestor (contractor) is provided a decision of the laboratory certification. For more details on the lab certification process, reference Revision 1 of the DLA Troop Support Additional Quality Assurance Requirements dated August 2021, which is incorporated by reference into this contract. . 12/20/2023 IAW BASIC NON GOVT STD PIA-W-5664C REVISION NR C DTD 12/14/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 14153 C&T-ADDITQAR REVISION NR 1 DTD 08/02/2021 PART PIECE NUMBER: CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 9 OF 27 PAGES SPE1C1-24-T-1867 SECTION B IAW REFERENCE SPEC NR MIL-DTL-15011K(1) NOT 1 REVISION NR 1 DTD 02/24/2023 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-P-43334C REVISION NR C DTD 09/30/1986 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-147E(2) REVISION NR E DTD 06/27/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-1916 NOT 2 REVISION NR DTD 06/05/2014 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-2073-1E(4) REVISION NR E DTD 04/22/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-3064 REVISION NR DTD 06/18/2019 PART PIECE NUMBER: CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7005832997 0001 YD 1,000.000 NSN/MATERIAL:8305004328179 DELIVERY (IN DAYS):0105 DELIVER FOB: DESTINATION QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C UNIT CONT:A2 OPI:O PACK CODE:Z PACKING LEVEL: B MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT SECTION D - PACKAGING AND MARKING ALL WOOD PACKAGING MATERIAL (WPM) USED MUST MEET REQUIREMENTS OF INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM) 15, "GUIDELINES FOR REGULATING WOOD PACKAGING MATERIALS IN INTERNATIONAL TRADE." DOD SHIPMENTS INSIDE AND OUTSIDE OF THE UNITED STATES MUST MEET ISPM 15 WHENEVER WPM IS USED TO SHIP DOD CARGO. ALL WPM SHALL COMPLY WITH THE OFFICIAL QUALITY CONTROL PROGRAM FOR HEAT CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 10 OF 27 PAGES SPE1C1-24-T-1867 SECTION B PR: 7005832997 PRLI: 0001 CONT’D TREATMENT (HT) OR KILN DRIED HEAT TREATMENT (KD HT) IN ACCORDANCE WITH AMERICAN LUMBER STANDARD COMMITTEE(>,)> INCORPORATED (ALSC) WOOD PACKAGING MATERIAL PROGRAM AND WPM ENFORCEMENT REGULATIONS (SEE HTTP://WWW.ALSC.ORG/). ALL WPM SHALL INCLUDE CERTIFICATION/QUALITY MARKINGS IN ACCORDANCE WITH THE ALSC STANDARD. MARKINGS SHALL BE PLACED IN AN UNOBSTRUCTED AREA THAT WILL BE READILY VISIBLE TO INSPECTORS. PALLET MARKINGS SHALL BE APPLIED TO THE STRINGER OR BLOCK ON DIAGONALLY OPPOSITE SIDES OF THE PALLET AND BE CONTRASTING AND CLEARLY VISIBLE. ALL CONTAINERS SHALL BE MARKED ON A SIDE OTHER THAN THE TOP OR BOTTOM, CONTRASTING AND CLEARLY VISIBLE. ALL DUNNAGE USED IN CONFIGURING AND/OR SECURING THE LOAD SHALL ALSO COMPLY WITH ISPM 15 AND BE MARKED WITH AN ASLC APPROVED DUNNAGE STAMP. THE OVERALL PACKAGING AND PRESERVATION, IF APPLICABLE, SHALL CONFORM TO MIL-STD-2073-1E (WITH CHANGE 4 DATED 22 APRIL 2019) STANDARD PRACTICE FOR MILITARY PACKAGING FOR SHIPMENTS TO THE DEPARTMENT OF DEFENSE. UNIT CONTAINER: EACH ROLL OF THE WEBBING SHALL BE INDIVIDUALLY PACKAGED IN ANY BAG USED BY THE VENDOR. INTERMEDIATE CONTAINER: NOT REQUIRED; THE USE OF INTERMEDIATE PACKAGING IS ENCOURAGED PARTICULARLY WHEN SUCH USE ENHANCES HANDLING AND STORAGE. IF USED, VENDOR SHALL USE ANY SUITABLE FIBER BOX INCLUDED IN TABLE J-VII OF MIL-STD-2073-1E CHANGE 4 (PDF Pages 185/214) MAY BE USED (SEE ALSO J.4.9.1). EXTERIOR CONTAINER: SHALL BE STYLE: REGULAR SLOTTED BOX (RSC)(>,)> TYPE: CORRUGATED FIBERBOARD (CF), VARIETY DOUBLEWALL FIBERBOARD (DW), CLASS: DOMESTIC, GRADE: 275 WITH A SINGLE WALL LINER OR DW ECT GRADE 48, MADE TO THE REQUIREMENTS OF ASTM D5118M, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES TO INSURE MEETING THE REQUIREMENTS OF A PACK THAT WILL SUPPORT RE-TRANSPORT, STORAGE, STACKING, ETC. . THE PACKAGING CONTAINER SHALL BE SUFFICIENT TO PROVIDE PROTECTION DURING TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION IN THE SAME CONDITION AS ORIGIN. PACKAGED COMPONENTS SHALL BE BULK PACKAGED IN A THAT WILL SUPPORT RE-TRANSPORT, STORAGE, STACKING, ETC. REFERENCE ASTM INTERNATIONAL DESIGNATION D1974M (STANDARD PRACTICE FOR METHODS OF CLOSING, SEALING, AND REINFORCING FIBERBOARD BOXES, WHICH DESCRIBES SEVERAL METHODS FOR CLOSING, SEALING, AND REINFORCING FIBERBOARD (SOLID AND CORRUGATED) SHIPPING BOXES USED FOR SHIPMENT. A PRESSURE SENSITIVE IDENTIFICATION LABEL SHALL ATTACH TO EACH PACKAGING BOX OF THE COMPONENT. THE PACKAGING CONTAINER SHALL BE SUFFICIENT TO PROVIDE PROTECTION DURING TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION IN THE SAME CONDITION AS ORIGIN. SURFACE OF THE PALLET. WHEN SPECIFIED PALLETIZATION IS REQUIRED, COMPONENTS SHALL BE PALLETIZED ON A FOUR-WAY ENTRY PALLET IN ACCORDANCE WITH LOAD TYPE I OR IA, AS APPLICABLE, OF MIL-STD-147E, CHANGE 2 DATED 27 JUNE 2019. . PALLETIZATION. Palletization shall be in accordance RP001, Section 3. . THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING MATERIALS. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE. CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 11 OF 27 PAGES SPE1C1-24-T-1867 SECTION B PR: 7005832997 PRLI: 0001 CONT’D PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY MARKED "SHORT" OR "OVER". . All unit, intermediate and shipping containers shall be marked in accordance with MIL-STD-129R, with Change 3 dated 25 February 2023. . IN ADDITION TO SPECIAL MARKING REQUIRED(>,)> INTERIOR (UNIT) PACKS, INTERMEDIATE CONTAINERS(>,)> SHIPPING CONTAINERS AND PALLETIZED UNIT LOADS SHALL BE MARKED FOR SHIPMENT, STOWAGE, AND STORAGE IN ACCORDANCE WITH MIL-STD-129R CHANGE 3 DATED 25 FEBRUARY 2023. GUIDANCE FOR THE REQUIRED IDENTIFICATION TEXT MARKINGS OF THE UNIT, INTERMEDIATE, AND EXTERIOR CONTAINERS ARE FOUND ON PAGES 24 TO 28 WITHIN MIL-STD-129R WITH CHANGE 3 DATED 25 FEBRUARY 2023. . Lot number as an identification text marking is required on all unit packs and intermediate containers.(>,)> . The shipment number and container number are required on all exterior containers, palletized unit loads, and unpacked items. See MIL-STD-129R with Change 3, 5.1.2. f.(3) for more details. . 12/20/2023 PARCEL POST ADDRESS: UY8615 ARIZONA INDUSTRIES FOR THE BLIND 515 N 51ST AVENUE NUMBER 130 DOCK 1 PHOENIX AZ 85043 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: UY8615 ARIZONA INDUSTRIES FOR THE BLIND 515 N 51ST AVENUE NUMBER 130 DOCK 1 PHOENIX AZ 85043 US Need Ship Date:00/00/0000 Original Required Delivery Date:08/26/2024 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *