34--Bridgeport Series 1 Milling Machine

CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is MillingMachine06152018JLR and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-97. The associated North American Industrial Classification System (NAICS) code for this procurement is 2005-97 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-03-21 17:00:00.0 Eastern Time or as otherwise displayed at

rel="no-follow" href="http://www.FedBid.com" target="_blank">www.FedBid.com. FOB Destination shall be Fort Benning, GA 31905The MICC End User requires the following items, Brand Name or Equal, to the following:LI 001: Bridgeport Series 1 Milling Machine The milling machine should meet or exceed the exceed the following specifications and salient characteristics: MODEL 2J HEAD 2HP; TABLE MUST BE 48"; 12" Y AXIS TRAVEL; HARD CHROME WAYS AND GIBS; THE TABLE GIB IS TO BE HAND SCRAPED SUCH THAT THE TABLE TO SADDLE DEFLECTION IS IN THE RANGE OF .0002 TO .0004 INCHES. IN THIS CONDITION THE TORQUE TO ROTATE THE X AXIS HANDLE TO THE 40 IN POUNDS OR LESS; THE SADDLE GIB IS TO BE HAND SCRAPED SUCH THAT THE SADDLE TO KNEE DEFLECTION IS IN THE RANGE .0002 TO .0004 INCHES. IN THIS CONDITION THE TORQUE TO ROTATE THE Y AXIS HANDLE TO BE 40 IN POUNDS OR LESS; MACHINE WEIGHT MUST NOT EXCEED 1975 (2100 SHIPPING); MAXIMUM FLOOR SPACE:8.3 X 5.3 FT; MAXIMUM MACHINE HEIGHT: 7.0 FT; WORKTABLE SPECS: STANDARD 49 X 9"; T-SLOT CENTER DISTANCE 3 @ 2.5" CENTERS; T-SLOT SIZE-0.625"; HEIGHT ABOVE FLOOR (MAX) 47.25"; WEIGHT OF WORKPIECE (MAX) -750 LBS; SPEED RANGE:HIGH (INFINITELY VARAIABLE) -500-4200 RPM; LOW-60 -500 RPM; POWER QUILL FEED-0.0015", 0.003" & 0.006"/REV WITH MANUAL ADJUSTMENT; DRILLING CAPACITY: POWER QUILL FEED 3/8" DIA., MANUALDRILLING CAPACITY-3/4" MILD STEEL, BORING RANGE-6" MILD STEEL, SPRINDLE DIAMETER-1,875 IN., QUILL DIAMETER-3.375"; SPINDLE (2J HEAD):POWER RATING 30 MIN. DUTY CYCLE-3HP, POWER RATING CONTINUOUS-2HP, TOOLING R-8 COLLETS; RANGE:TABLE TRAVEL (X AXIS)-36", SADDLE TRAVEL (Y-AXIS)-12"; QUILL TRAVEL 5", KNEE TRAVE (Z AXIS)-16", RAM TRAVEL-12", THROAT DISTANCE (MAX)-6.75", THROAT DISTANCE (MIN)-18.75"; LUBRICATION SYSTEM: ONE SHOT LUBRICATION SYSTEM; MACHINE MUST USE BARDEN ABEC 7 BEARINGS, 1, EA;LI 002: HI WIN PRECISION GROUND BELL SCREWS, X AND Y AXES, 1, EA;LI 003: NEWALL DP700 X,Y AND Z (5 INCH ON QUILL) AXES DRO LESS 10 PERCENT, 1, EA;LI 004: SERVO MODEL 150 X AXIS TABLE FEED INSTALLED, 1, EA;LI 005: SERVO MODEL 150 Y AXIS CROSS FEED INSTALLED, 1, EA;LI 006: SERVO MODEL 140 Z AXIS KNEE FEED INSTALLED, 1, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.