Industrial Valve Manufacturing, Other Aircraft Parts, Motor Vehicle Parts Manufacturing

DLA Land and Maritime will issue a solicitation to establish a long-term contract for the NSNs on the attached spreadsheet. The AMC/AMSC code, approved sources, and Annual Demand Quantities are on the attached spreadsheet.  The subject solicitation will be issued approximately on January 29, 2021. The attached Product Item Description provides information concerning the subject requirements. Please review the Market Research Questionnaire and Spreadsheet (which is included in this posting) for the NSNs and provide any source that may be able to manufacture this NSN. This notice provides the opportunity for contractors interested in becoming qualified as a source to provide the subject NSNs.  All information may be submitted directly to the Contract Specialist Michael Shirley at Michael.Shirley@dla.mil. This information must be provided by the response date.NSN 4320-00-946-1254 (Rotary Pump): A PUMP ROTOR OR IMPELLER

CONSISTING OF TWO GEARS, THE OUTER GEAR HAVING INTERNAL TEETH (LOBES) AND THE INNER GEAR HAVING EXTERNAL TEETH (LOBES). THE INNER GEAR HAS ONE OR TWO TEETH LESS THAN THE OUTER GEAR, AND IS MOUNTED TO MESH ECCENTRIC WITH THE OUTER GEAR.NSN 4820000534565 (Safety Relief Valve): A VALVE DESIGNED TO AUTOMATICALLY RELEASE EXCESSIVE PRESSURES. IT IS ACTUATED BY STATIC PRESSURE UPSTREAM OF THE VALVE AND IS USED AS A SAFETY VALVE OR RELIEF VALVE, AND MAY BE SET TO CLOSE AT A PREDETERMINED PRESSURENSN 5945009452330 (Solenoid): AN ITEM CONSISTING OF ONE OR MORE COILS SURROUNDING AN IRON CORE. THE COIL(S) AND THE CORE ARE MOVEABLE IN RELATION TO EACH OTHER. THE AXIAL OR ROTARY MOVEMENT IS A RESULT OF THE MAGNETIC FLUX OF THE COIL. IT IS DESIGNED TO CONVERT ELECTRICAL ENERGY INTO MECHANICAL ENERGY. IT DOES NOT INCLUDE SWITCH CONTACT.NSN 4820008580371 (Valve): A MANUALLY OR POWER OPERATED VALVE HAVING THREE OR MORE PORTS. THE DIRECTION OF THE FLOW THROUGH THE VARIOUS PORTS IS CONTROLLED BY EITHER ONE OR MORE RECIPROCATING SLIDE(S) OR SPOOL(S) WITH RECESS AREAS WHICH MATE WITH PORTS IN AN INTEGRAL OR REPLACEABLE PORTED SLEEVE, OR ONE OR MORE POPPET(S). IT IS DESIGNED TO CHANGE THE DIRECTION OF FLUID FLOW FROM ONE VALVE PORT TO ANOTHER. AN OFF (NO FLOW) POSITION IS NOT A FLOW PATTERN.