PARTS KIT, DIESEL EN

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 16 PAGES SPE7L7-24-Q-0336 SECTION B SUPPLY/SERVICE: 2815-01-492-5709 CONT'D SUPERKID. ALL ACTIONS SHOULD BE EXPEDITED AS MUCH AS PRACTICABLE. SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES

IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. ************************************************** NOTE: ITEM NO. 5 ON BASIC DWG - 2815NR0391 IS A CRITICAL ITEM WHICH CAN HAVE SAFETY ISSUES. THIS ITEM NO. 5 IS FOR A QUANTITY OF 4 - WASHER, KEY, AND EACH WASHER, KEY RELATES TO AM GENERAL CAGE(34623) & P/N(5584462). THE WASHER, KEY IN QUESTION HAS 15 TABS ON THE OUTSIDE DIAMETER AND ONE TAB ON THE INSIDE DIAMETER. TO INSURE THE CORRECT LOCKWASHER IS OBTAINED; - CONFIRMATION THAT EACH LOCKWASHER IS MARKED WITH ORANGE OR BLACK PAINT IS REQUIRED. THE ORANGE OR BLACK PAINT WILL BE MARKED ON FOUR OF THE OUTSIDE DIAMETER TABS. - CERTIFICATION FROM AM GENERAL IS ALSO REQUIRED FOR THIS COMPONENT. ************************************************* Exception to drawing 2815NR0391 rev C DTD 04/21/2008 Item# 1 cage code/Part Number correction. Remove Cage 3ES68 Part Number W250D54 Add Cage 0CAN1 Part Number AD-53-IF Cage 0DBY7 Part Number W250D54 FULL AND OPEN COMPETITION APPLIES. CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 16236 2815NR0391 REVISION NR C DTD 04/21/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12342870 REVISION NR F DTD 09/16/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12342680 REVISION NR B DTD 03/23/1994 PART PIECE NUMBER: ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT . 0001 2815-01-492-5709 156.000 KT $ ________________ $ ________________ PARTS KIT,DIESEL EN PRICING TERMS: Firm Fixed Price QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN FOB: ORIGIN DELIVERY DATE: 200 DAYS ADO PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ED OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 16 PAGES SPE7L7-24-Q-0336 SECTION B SUPPLY/SERVICE: 2815-01-492-5709 CONT'D SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ATTENTION: HISTORY OF PACKAGE DESIGN COMPLAINT. UNIT OF ISSUE IS "KT" (KIT). PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM CONTAINED WITHIN THE KIT. MOP IS 31 - HEAT SEALED BARRIER BAGS. EACH FILTER SHALL BE PLACED INSIDE INDIVIDUAL AND SPECIFIED WATERPROOF BARRIER BAG AND HEAT SEALED, THEN PLACED INSIDE SNUG-FITTING (CODE: D3) BOX AND (CUSHION AS APPLICABLE) TO ADEQUATELY PROTECT PARTS IN KIT UNIT CONTAINER. REQUIRED KIT MARKINGS SHALL BE PLACED ON BOTH BAG AND BOX AS WELL AS OTHER KIT COMPONENTS. NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein. NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice. Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel. ZZ = SPECIAL MARKING REQUIREMENTS: SEGREGATION AND INDIVIDUAL IDENTIFICATION REQUIREMENTS ARE LISTED IN MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.4.2. A PARTS LIST (WITH PART NAME, PART NUMBER & QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT. IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL ALSO BE INCLUDED WITHIN EACH PACKAGE. PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY TO ULTIMATE USER. PARCEL POST ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 16 PAGES SPE7L7-24-Q-0336 SECTION B SUPPLY/SERVICE: 2815-01-492-5709 CONT'D 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT . 0002 2815-01-492-5709 597.000 KT $ ________________ $ ________________ PARTS KIT,DIESEL EN PRICING TERMS: Firm Fixed Price QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN FOB: ORIGIN DELIVERY DATE: 200 DAYS ADO PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ED OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ATTENTION: HISTORY OF PACKAGE DESIGN COMPLAINT. UNIT OF ISSUE IS "KT" (KIT). PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM CONTAINED WITHIN THE KIT. MOP IS 31 - HEAT SEALED BARRIER BAGS. EACH FILTER SHALL BE PLACED INSIDE INDIVIDUAL AND SPECIFIED WATERPROOF BARRIER BAG AND HEAT SEALED, THEN PLACED INSIDE SNUG-FITTING (CODE: D3) BOX AND (CUSHION AS APPLICABLE) TO ADEQUATELY PROTECT PARTS IN KIT UNIT CONTAINER. REQUIRED KIT MARKINGS SHALL BE PLACED ON BOTH BAG AND BOX AS WELL AS OTHER KIT COMPONENTS. NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein. NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice. Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel. ZZ = SPECIAL MARKING REQUIREMENTS: CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 16 PAGES SPE7L7-24-Q-0336 SECTION B SUPPLY/SERVICE: 2815-01-492-5709 CONT'D SEGREGATION AND INDIVIDUAL IDENTIFICATION REQUIREMENTS ARE LISTED IN MIL-STD-2073-1, APPENDIX D, PARAGRAPH D.4.2. A PARTS LIST (WITH PART NAME, PART NUMBER & QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT. IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL ALSO BE INCLUDED WITHIN EACH PACKAGE. PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY TO ULTIMATE USER. PARCEL POST ADDRESS: W25G1U W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: W25G1U W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date . 0001 7007176931 0001 N/A N/A N/A 10/05/2024 0002 7007176931 0002 N/A N/A N/A 10/05/2024 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 16 PAGES CONTINUED ON NEXT PAGE SPE7L7-24-Q-0336 SECTION I - CONTRACT CLAUSES 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR 252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS 252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT INFORMATION (JAN 2023) DFARS 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (JAN 2023) DFARS 252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN 2023) DFARS 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (NOV 2021) FAR 52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (OCT 1997) FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2020) FAR 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (FEB 2024) FAR Insert the following deviation clause in solicitations and contracts exceeding the micro-purchase threshold to be set aside for, or to be awarded on a sole source basis to, service-disabled veteran-owned small business concerns, when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied FAR part 19.3 in accordance with FAR 19.000(b)(1): (a) Definitions. As used in this clause -- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217 -8, Option to Extend Services, or other appropriate authority. Small business concern -- (1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (d) of this clause. (2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103. (b) If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, upon occurrence of any of the following: (1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract. (2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract. (3) For long-term contracts -- (i) Within 60 to 120 days prior to the end of the fifth year of the contract; and (ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter. (c) If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, when the Contracting Officer explicitly requires it for an order issued under a multiple-award contract. (d) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards. (e) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a https://www.ecfr.gov/current/title-13/part-121 https://www.ecfr.gov/current/title-13/section-121.103 https://www.ecfr.gov/current/title-13/section-121.103 https://www.sba.gov/document/support--table-size-standards CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 16 PAGES CONTINUED ON NEXT PAGE SPE7L7-24-Q-0336 SECTION I - CONTRACT CLAUSES (CONTINUED) construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition -- (1) Was set aside for small business and has a value above the simplified acquisition threshold; (2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or (3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole- source award regardless of dollar value. (f) Except as provided in paragraph (h) of this clause, the Contractor shall make the representation(s) required by paragraph (b) and (c) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause, or with its offer for an order (see paragraph (c) of this clause), that the data have been validated or updated, and provide the date of the validation or update. (g) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (f) or (h) of this clause. (h) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed: (1) The Contractor represents that it [] is, [] is not a small business concern under NAICS Code 333618 assigned to contract number . (2) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [] is, [] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (3) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [] is, [] is not a women-owned small business concern. (4) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [] is, [] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] (5) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it [] is, [] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] (6) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [] is, [] is not a veteran-owned small business concern. (7) [Complete only if the Contractor represented itself as a veteran-owned small business concern in paragraph (h)(6) of this clause.] The Contractor represents that it [] is, [] is not a service-disabled veteran-owned small business concern. (8) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [] is, [] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] (9) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that -- (i) It [] is, [] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [] is, [] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (h)(8)(i) of this clause is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The Contractor shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. [Contractor to sign and date and insert authorized signer's name and title .] (End of clause) 252.219-7000 ADVANCING SMALL BUSINESS GROWTH (JUN 2023) FAR 52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEC 2022) FAR 52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015) FAR 52.222-26 EQUAL OPPORTUNITY (SEP 2016) FAR 52.222-50 COMBATING TRAFFICKING IN PERSONS (NOV 2021) FAR 52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (JAN 2022) FAR 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (JUN 2020) FAR https://www.ecfr.gov/current/title-13/section-124.1002 https://www.ecfr.gov/current/title-13/section-127.506 https://www.ecfr.gov/current/title-13/section-127.506 https://www.ecfr.gov/current/title-13/section-127.506 https://www.ecfr.gov/current/title-13/section-127.506 https://www.ecfr.gov/current/title-13/part-126 https://www.ecfr.gov/current/title-13/part-126 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 16 PAGES CONTINUED ON NEXT PAGE SPE7L7-24-Q-0336 SECTION I - CONTRACT CLAUSES (CONTINUED) 52.223-20 AEROSOLS (JUN 2016) FAR 52.223-21 FOAMS (JUN 2016) FAR 252.223-7009 PROHIBITION OF PROCUMENT OF FLOURINATED AQUEOUS FILM-FORMING FOAM FIRE-FIGHTING AGENT FOR USE ON MILITARY INSTALLATIONS (OCT 2023) FAR 252.225-7008 RESTRICTION ON ACQUISITION OF SPECIALTY METALS (MAR 2013) DFARS 252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND TUNGSTEN (JAN 2023) DFARS 252.225-7054 PROHIBITION ON USE OF CERTAIN ENERGY SOURCED FROM INSIDE THE RUSSIAN FEDERATION (JAN 2023) FAR 252.225-7055 REPRESENTATION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME (MAY 2022) DFARS 252.225-7056 PROHIBITION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME (JAN 2023) DFARS 252.225-7057 PREAWARD DISCLOSURE OF EMPLOYMENT OF INDIVIDUALS WHO WORK IN THE PEOPLE’S REPUBLIC OF CHINA (AUG 2022) DFARS 252.225-7058 POSTAWARD DISCLOSURE OF EMPLOYMENT OF INDIVIDUALS WHO WORK IN THE PEOPLE’S REPUBLIC OF CHINA (JAN 2023) DFARS 252.225-7062 RESTRICTION ON ACQUISITION OF LARGE MEDIUM-SPEED DIESEL ENGINES (JUL 2023) DFARS 252.225-7967 PROHIBITION REGARDING RUSSIAN FOSSIL FUEL BUSINESS OPERATIONS (CLASS DEVIATION 2024-O0006) (JAN 2024) DFARS As prescribed in Class Deviation 2024-O0006, use the following clause: (a) Definitions. As used in this clause -- “Business operations” means knowingly engaging in commerce in any form, including acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other known apparatus of business or commerce. The term does not include -- (1) Any shipment subject to price caps as specified in the -- (i) “Statement of the G7 and Australia on a Price Cap for Seaborne Russian-Origin Crude Oil”, issued on December 2, 2022, between member countries of that coalition; or (ii) “Statement of the G7 and Australia on Price Caps for Seaborne Russian-Origin Petroleum Products Berlin, Brussels, Canberra, London, Ottawa, Paris, Rome, Tokyo, Washington”, issued on February 4, 2023, between such members, if such shipment complies with the applicable price caps; or (A) Actions taken for the benefit of the country of Ukraine, as determined by the Secretary; or (B) Actions taken to support the suspension or termination of business operations for commercial activities during the period beginning on the effective date and ending on December 31, 2029, including -- (1) Any action to secure or divest from facilities, property, or equipment; (2) The provision of products or services provided to reduce or eliminate operations in territory internationally recognized as the Russian Federation or to comply with sanctions relating to the Russian Federation; and; (3) Activities that are incident to liquidating, dissolving, or winding down a subsidiary or legal entity in Russia. Fossil fuel company means an entity or individual that -- (1) Carries out oil, gas, or coal exploration, development, or production activities; (2) Processes or refines oil, gas, or coal; or (3) Transports, or constructs facilities for the transportation of, Russian oil, gas, or coal. (b) Prohibition. In accordance with section 804 of the National Defense Authorization Act for Fiscal Year 2024 (Pub. L. 118-31), the Contractor is prohibited from entering into a subcontract or other contractual instrument for the procurement of products or services with any entity or individual that is known to be, or that is known to have fossil fuel business operations with an entity or individual that is, not less than 50 percent owned, individually or collectively, by -- (1) An authority of the government of the Russian Federation; or