INDICATOR, SIGHT, LIQ

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 38 PAGES CONTINUED ON NEXT PAGE SPE4A7-23-Q-0391 SECTION A - SOLICITATION/CONTRACT FORM TECHNICAL REQUIREMENTS THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW- ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020) FAR SECTION C -

SPECIFICATIONS/SOW/SOO/ORD C04 UNUSED FORMER GOVERNMENT SURPLUS PROPERTY (SEP 2021) To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer. (1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ] The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No [ ] The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown [ ] If No, the revision does not affect form, fit, function, or interface. Yes[ ] No [ ] Unknown [ ] The material was manufactured by: (Name): (Address): (2) The offeror currently possesses the material: Yes [ ] No [ ] If yes, the offeror purchased the material from a Government selling agency or other source. Yes [ ] No [ ] If yes, complete the following: Government Selling Agency: Contract Number: Contract Date: (Month, Year): Other Source: Address: Date Acquired: (Month/Year): (3) The material has been altered or modified. Yes [ ] No [ ] If Yes, complete the following: Name of the company that performed the alternation or modification Address: Complete description of the alternations or modifications: (4) The material has been reconditioned. Yes [ ] No [ ] If Yes, complete the following: (i) The price offered includes the cost of reconditioning/refurbishment. Yes [ ] No [ ] (ii) Name of the company that reconditioned that material (iii) Description of any work done or to be done, including the components to be replaced and the applicable rebuild standard. The material contains cure-dated components. Yes [ ] No [ ] If Yes, complete the following: CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 38 PAGES CONTINUED ON NEXT PAGE SPE4A7-23-Q-0391 SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED) (i)The price includes replacement of cure-dated components. Yes [ ] No [ ] (ii) Cure date: (5) The material has data plates attached. Yes [ ] No [ ] If Yes, insert all information contained on the data plate: (6)The offered material is in its original package. Yes [ ] No [ ] If Yes, complete the following: Contract Number: NSN: CAGE Code: Part Number: Other Markings/Data: (7)The offeror has supplied this same material (National Stock Number) to the Government before. Yes [ ] No [ ] If Yes, complete the following: (i) The material being offered is from the same original Government contract number as that provided previously. Yes [ ] No [ ] (ii) State below the Government Agency and contract number under which the material was previously provided: Agency: Contract Number: (8)The material is manufactured in accordance with a specification or drawing. Yes [ ] No [ ] If Yes, complete the following: (i) The specification/drawing is in the possession of the offeror. Yes [ ] No [ ] (ii) The offeror has stated the applicable information below: Yes [ ] No [ ] Specification/Drawing Number: Revision: (if any): Date: (9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes [ ] No [ ] If Yes, complete the following: (i) Material has been re-preserved. Yes [ ] No [ ] (ii) Material has been repackaged. Yes [ ] No [ ] (iii) Percentage of material that has been inspected is %; and/or (iv) Number of items inspected is (v) A written report was prepared. Yes [ ] No [ ] The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation. (i) Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection. The offeror will forward to the contracting officer one of the following, within 24 hours of request by the contracting officer to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies): [ ] For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document. [ ] For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material. [ ] When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (6) of this procurement note. Yes [ ] No [ ] .) [ ] When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe: This procurement note only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 38 PAGES CONTINUED ON NEXT PAGE SPE4A7-23-Q-0391 SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED) for Part Numbered Items. If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted. In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract. C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2020) C01 SUPERSEDED PART NUMBERED ITEMS (SEP 2016) C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE MATERIALS OR COMPONENTS (DEC 2016) SECTION E - INSPECTION AND ACCEPTANCE 52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR (a) The Contractor shall comply with the higher-level quality standard(s) listed below. Title Number Date Tailoring ISO 9001:2015 [Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.] (b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in- (1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or (2) When the technical requirements of a subcontract require- (i) Control of such things as design, work operations, in-process control, testing, and inspection; or (ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology. (End of Clause) E05 PRODUCT VERIFICATION TESTING (MAY 2020) (1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory. (2) The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing. (3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor's sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 38 PAGES CONTINUED ON NEXT PAGE SPE4A7-23-Q-0391 SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED) commercial shipping document) and the contractor's signed DD Form 1222. The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples - Do Not Post to Stock," Contract Number [ ] and Lot/Item Number [ ]” adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express). The contractor shall include the following in the interior package: (a) Hard copies of the contract; (b) Material certifications/process operation sheets; and (c) Drawings used to manufacture the units and return shipping information. (4) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery. (5) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor. E06 INSPECTION AND ACCEPTANCE AT SOURCE (JUN 2018) Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below. The contractor shall indicate the location where supplies will be inspected, if different from the production location: Commercial and Government Entity (CAGE) code: Address: Applicable to contract line item numbers(s) (CLIN(s)): The contractor shall indicate the location where packaging will be inspected, if different from the production location: [ ] Same as for supplies OR CAGE code: Address: Applicable to CLIN(s): The contractor shall indicate the location where supplies will be accepted, if different from the inspection location: Commercial and Government Entity (CAGE) code: Address: Applicable to contract line item numbers(s) (CLIN(s)):