RDMV 334: 2025 Motor Vehicle Inspection Stickers

Bid Information Bid Alert No: 00003240650 Bid Title: RDMV 334: 2025 Motor Vehicle Inspection Stickers Agency Bid No. Title: 230358 Received Date: 09/23/2022 Close Date: 09/28/2022 Purchase Type: Term: 12/01/2022 Delivery Point: NH Department of Safety, New Hampshire Delivery Date: Not Stated Specifications Specifications include, but are not limited to: 1) Only manufacturers may quote on this project, and all production must be done within biddersown facilities. Quotes from independent sales reps or brokers will not be accepted, andquotes based on subcontracting any portion of the production process will not be accepted.2) To receive a contract award, quoter must be registered as an authorized vendor to the Stateof NH.QUANTITY: 1) 1,600 booklets with 25 sticker pages per book, for a total of 40,000 sticker pages. Underrunmay not exceed 0.5%. No overrun allowed.CONSTRUCTION: 1) Booklets are 7-1/2" wide x 3 high; will consist of twenty-five (25) interior leaves sandwichedbetween front

and back cover leaves; and will be bound at the left side edge by two heavyduty staples. There shall be no binding tape of any type around the binding edge.2) Front and back cover leaves will be flat sheets of 100 lb. tag, size 7-1/2" wide x 3 high. Front& back covers must both have a stub perforation. The front cover will be printed 1/1 in black.Each booklets front cover will be printed and numbered to indicate the range of serialnumbers contained in that booklet. The back cover will not be printed.3) Interior leaves shall be made entirely of white 60 lb. opaque vellum text paper, size 7-1/2"wide x 3 high, and will have two functionally distinct areas, as follows:A) On the left (refer to image of front side view on next page), a 4-1/2 x 3 inspectorsworksheet area. This will include the unprinted portion that is bound with staples. Therewill be no stub perforation, since the inspectors worksheet will remain always bound in thebooklet.B) On the right, a 3 x 3 inspection sticker, perforated for tear-off from the inspectorsworksheet. This sticker shall be made of the same paper as the inspectors worksheet, andwill be made into a sticker through the application of an adhesive transfer tape coveringexactly the 3 x 3 area of the sticker face (on the back side of the leaf). See images of theprevious years sticker on next page. Bid Related Documents Download Document Product Code: 25526 Agency Information Issuing Agency: State of New Hampshire - Department of Administrative Services State: New Hampshire Agency Type: State and Local Contact: Donald LaBrie Email: donald.labrie@nh.gov < PREVIOUS PAGE