HYDRATION SYSTEM

PR: 0095270834 NSN/MATERIAL:8465015561000 ITEM DESCRIPTION HYDRATION SYSTEM HYDRATION SYSTEM RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING: LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG

FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM. NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS. THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS: BAR CODE OMITTED OR NOT READABLE BY SCANNER HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075. IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075. The Contractor shall maintain Traceability Records for all component parts used to manufacture the End Item Product. All Component parts Lot Identification shall be traceable via the End Item Product's Lot Number. Subcontractor's Component part Lot information shall enable Traceability to the raw materials used in the Component part. Records shall be maintained and readily available for Government reference. For End Item Products identified with individual Serial Numbers, the Traceability requirements listed above shall be traceable via the individual Serial Number. "MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE, CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 26 PAGES SPE1C1-22-T-1424 SECTION B AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007) INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075: PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE TYPE VI FINISHED LABEL." UNDER "TEARING STRENGTH" DELETE: "(LB.) MINIMUM" AND SUBSTITUTE: "(GNS) MINIMUM." PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD "AND THE UNIVERSAL PRODUCT CODE (UPC) SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs." INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION. ADDITIONAL INFORMATION FOR MIL-STD-105E: MIL-STD-105E, dated 10 May 1989, is hereby canceled. Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes." Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document. (Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) (Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.) MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE DATED: 27 SEPTEMBER 2019 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C(>&)>T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C(>&)>T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C(>&)>T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. MIL-STD-147E w/CHANGE 2 27 JUNE 2019 DEPARTMENT OF DEFENSE STANDARD PRACTICE PALLETIZED UNIT LOADS CAMELBAK PRODUCTS, LLC 063G3 P/N 90619 NAVISTAR DEFENSE LLC 338X5 P/N 3715264C1 CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 0095270834 0001 EA 4.000 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 26 PAGES SPE1C1-22-T-1424 SECTION B PR: 0095270834 PRLI: 0001 CONT’D NSN/MATERIAL:8465015561000 DELIVERY (IN DAYS):0005 DELIVER FOB: DESTINATION QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION PREP FOR DELIVERY: PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951. All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT BULK BREAK POINT: W42QRH W6YF USALRCTR FT POLK BLDG 4374 CLASS PACK SEC 7585 VIRGINIA AVE FORT POLK LA 71459-7054 US SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST. FREIGHT SHIPPING ADDRESS: W8115U W6YF USALRCTR FT POLK AWCF SSF BLD 4374 CL PACK SEC 7585 VIRGINIA AVENUE FORT POLK LA 71459-0000 US MARKFOR W8115U W6YF USALRCTR FT POLK AWCF SSF BLD 4374 CL PACK SEC 7585 VIRGINIA AVENUE FORT POLK LA 71459-0000 US M/F: (TCN) W8115U22060008 RDD: 221 PROJ: TP 1 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 26 PAGES SPE1C1-22-T-1424 SECTION B PR: 0095270834 PRLI: 0001 CONT’D SUPP ADD: W9046W SIG: C FOR GOVERNMENT USE ONLY: (IPD) 02 DIC: A0A DIST: V ADV: FC: Z9 Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2022 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0002 0095270835 0001 EA 11.000 NSN/MATERIAL:8465015561000 DELIVERY (IN DAYS):0005 DELIVER FOB: DESTINATION QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION PREP FOR DELIVERY: PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951. All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT BULK BREAK POINT: W42QRH W6YF USALRCTR FT POLK BLDG 4374 CLASS PACK SEC 7585 VIRGINIA AVE FORT POLK LA 71459-7054 US SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST. FREIGHT SHIPPING ADDRESS: W8115U W6YF USALRCTR FT POLK AWCF SSF BLD 4374 CL PACK SEC 7585 VIRGINIA AVENUE FORT POLK LA 71459-0000 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 9 OF 26 PAGES SPE1C1-22-T-1424 SECTION B PR: 0095270835 PRLI: 0001 CONT’D US MARKFOR W8115U W6YF USALRCTR FT POLK AWCF SSF BLD 4374 CL PACK SEC 7585 VIRGINIA AVENUE FORT POLK LA 71459-0000 US M/F: (TCN) W8115U22060009 RDD: 221 PROJ: TP 1 SUPP ADD: W9046W SIG: C FOR GOVERNMENT USE ONLY: (IPD) 02 DIC: A0A DIST: V ADV: FC: Z9 Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2022 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 26 PAGES CONTINUED ON NEXT PAGE SPE1C1-22-T-1424