STUD ASSEMBLY, WASHERS,STUD TURNLOCKS, SCREW CAP, RING RETAINING

The DLA AVIATION-RICHMOND is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for the following National Stock numbers for parts manufactured by HOWMET GLOBAL FASTENING SYSTEMS INC, CAGE 71286:5305-01-088-7426, part number CA21089-4-2HS, EAD QTY 48344, DELIVERY – 88 DARO5305-01-090-9077, part number CA21089-4-6HS, EAD QTY 1960, DELIVERY – 88 DARO5310-01-091-1242, part number  CA21089-C-4R, EAD QTY 232, DELIVERY – 89 DARO5310-01-127-7603, part number CA21089-4R, EAD QTY 7600, DELIVERY – 89 DARO5325-00-171-4365, part number 212-12N, EAD QTY 2136, DELIVERY –82 DARO5325-00-588-4015, part number FX10-1540-1TS, EAD QTY 5360, DELIVERY – 82 DAR05325-00-703-1451, part number  2600E2S, EAD QTY 1832, DELIVERY – 82 DARO5325-00-731-7743, part number FX10-1582-1TS, EAD QTY 1832, DELIVERY – 82 DARO5325-00-799-3399, part number FX10-1540-2TS, EAD QTY 4216, DELIVERY –82

DARO5325-00-897-0637, part number FX10-1540-3TS, EAD QTY 520, DELIVERY – 109 DAR05325-01-164-1738, part number  CA17143-10, EAD QTY 300, DELIVERY – 109 DARO5325-01-333-5383, part number 26S13-A-22, EAD QTY 248, DELIVERY – 109 DARO5325-01-411-2372, part number CA1679-4HSR, EAD QTY 2280, DELIVERY –109 DARO5325-01-423-0951, part number CA2210-4R, EAD QTY 4824, DELIVERY – 82 DAR0The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) codes assigned to this procurement is CLINs 0001 - 0004 - 332722, CLINs 0005 -0009 & 0011-0013 – 332510, CLIN 0010- 339993 and CLIN 0014 – 332613.THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements.[Note: In accordance with FAR 10.001(b), agencies should not request potential sources to submit more than the minimum information necessary.]The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and 4) provide services under a performance based service acquisition contract.BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT WILL BE SET-ASIDE FOR UNRESTRICTED OR PROCURED THROUGH OTHER THAN FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice by 11/06/2020, 4:00 P.M. Eastern Standard Time.  All responses under this Sources Sought Notice must be emailed to lacountess.coleman@dla.mil. If you have any questions concerning this opportunity please contact: L. Dawn Coleman at 804-279-5922.APPENDIX 1: Purpose and Objectives Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s).  Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping.  Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets.  The unit prices will be established at the time of a contract award.The specific requirement for this effort is cited below. This acquisition is for a 5 year requirement to include a one year base and four option periods.REFER TO APPROVED SOURCE, EAD QTYs. Part Numbers and Delivery Schedules cited on page 1.Technical Orders and Qualification Requirements are not available.