Various electrical equipment

Tender No: GH12400734 Briefing Meeting: See details below or the tender documentation Tender Closing Date: 2024-04-02 12:00 Required At: City of Cape Town Details :- RFQ TypeGoods Goods Electrical Equipment & Components Reference Number GH12400734 Title Various electrical equipment Description 1 each x industrial rs-232 to sm fiber converter 1 each x dc to dc converter 2 each x single mode fiber Specification* 2 Serial Ports Serial Standards - RS-232, RS-422, RS-485 Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates) Flow Control ADDC (automatic data direction control) for RS-485 Connector 5-pin terminal block Single-mode ST connector Pull High/Low Resistor for RS-485 150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm, 770 ohm, 500 ohm, 485 ohm RS-485 Data Direction Control ADDC (automatic data direction control) Terminator for RS-485 N/A, 120 ohms, 120 kilo-ohms RS-232 - TxD, RxD, GND Power Parameters Input Current 264 mA @ 12 to 48 VDC

Input Voltage 12 to 48 VDC Power Consumption 264 mA @ 12 to 48 VDC Physical Characteristics Housing Metal IP Rating IP30 Dimensions 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) Weight 330 g (0.73 lb) Installation DIN-rail mounting Operating Temperature -40 to 85C Standards and Certifications EMC EN 55032/35 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF Environmental Testing IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3 Safety UL 61010-2-201 Vibration IEC 60068-2-6 Hazardous Locations UL/cUL Class I Division 2 Groups A/B/C/D ATEX Zone 2 Project: Vantage (Morgan Gronde MS) GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *NB: The Municipal Bidding Document 6.1 (MBD 6.1) has been amended, in order to be eligible for preference points bidders are required to submit a duly completed MBD 6.1 document with supporting documents with each and every RFQ submission.* Output: DC Voltage: 24V Rated Current: 2.5A Rated Power: 60W Voltage Adjust: 21.6 # 28V Input: Voltage Range: 18 # 75VDC Efficiency: 92% DC Current: 1.5A/48VDC Inrush Current: 20A/48VDC Protection: Overload: 105 # 135% Over Voltage: 28.8 # 34V Reverse polarity protection Environment: Working Temp: -40 to +85 degrees Celsius Working Humidity: 5 to 95% Safety Standards: IEC 62368-1, UL 62368-1, AS/NZS 62368-1, EAC TP TC 004 Approved Project: Vantage (Morgan Gronde MS) GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *NB: The Municipal Bidding Document 6.1 (MBD 6.1) has been amended, in order to be eligible for preference points bidders are required to submit a duly completed MBD 6.1 document with supporting documents with each and every RFQ submission.* 2 x ST/UPC - SC/UPC SINGLE MODE DUPLEX 3m fiber PATCH LEAD NON-RUGGERDISED Project: Vantage (Morgan Gronde MS) GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *NB: The Municipal Bidding Document 6.1 (MBD 6.1) has been amended, in order to be eligible for preference points bidders are required to submit a duly completed MBD 6.1 document with supporting documents with each and every RFQ submission. Delivery Date2024/06/14 Delivery ToTertius du toit 021 444 5474 Delivery Address01 Kruisfontein Road, Brackenfell Contact PersonTertius Du Toit Telephone Number0214445474 Cell Number Closing Date2024/04/02 Closing Time12:00 PM RFQ Submission Fax0000000000 RFQ Submission Fax 2 Buyer Email AddressMonja.Davids@capetown.gov.za Buyer DetailsM.Thorpe Buyer Phone0214006752 AttachmentsNo Attachments NOTE On 3 April 2018 the City of Cape Town went live with e-Procurement which was piloted with 3 commodities: Civil, Hardware, Electrical. No manual submissions will be accepted for these commodities and suppliers must log in to e-Services portal to access RFQs.Bids must be compliant with the Preferential Procurement Regulations, 2017 including but not limited to local content, functionality, price and preference, eligibility criteria and relevant statutory criteria. The details of this are contained in the RFQ document and/or the specification advertised via E-Procurement.Only locally produced goods or locally manufactured goods, meeting the stipulated minimum threshold for local production and content, will be considered, where applicable. Details :- Details :- RFQ TypeGoods Goods Electrical Equipment & Components Reference Number GH12400734 Title Various electrical equipment Description 1 each x industrial rs-232 to sm fiber converter 1 each x dc to dc converter 2 each x single mode fiber Specification* 2 Serial Ports Serial Standards - RS-232, RS-422, RS-485 Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates) Flow Control ADDC (automatic data direction control) for RS-485 Connector 5-pin terminal block Single-mode ST connector Pull High/Low Resistor for RS-485 150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm, 770 ohm, 500 ohm, 485 ohm RS-485 Data Direction Control ADDC (automatic data direction control) Terminator for RS-485 N/A, 120 ohms, 120 kilo-ohms RS-232 - TxD, RxD, GND Power Parameters Input Current 264 mA @ 12 to 48 VDC Input Voltage 12 to 48 VDC Power Consumption 264 mA @ 12 to 48 VDC Physical Characteristics Housing Metal IP Rating IP30 Dimensions 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) Weight 330 g (0.73 lb) Installation DIN-rail mounting Operating Temperature -40 to 85C Standards and Certifications EMC EN 55032/35 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF Environmental Testing IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3 Safety UL 61010-2-201 Vibration IEC 60068-2-6 Hazardous Locations UL/cUL Class I Division 2 Groups A/B/C/D ATEX Zone 2 Project: Vantage (Morgan Gronde MS) GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *NB: The Municipal Bidding Document 6.1 (MBD 6.1) has been amended, in order to be eligible for preference points bidders are required to submit a duly completed MBD 6.1 document with supporting documents with each and every RFQ submission.* Output: DC Voltage: 24V Rated Current: 2.5A Rated Power: 60W Voltage Adjust: 21.6 # 28V Input: Voltage Range: 18 # 75VDC Efficiency: 92% DC Current: 1.5A/48VDC Inrush Current: 20A/48VDC Protection: Overload: 105 # 135% Over Voltage: 28.8 # 34V Reverse polarity protection Environment: Working Temp: -40 to +85 degrees Celsius Working Humidity: 5 to 95% Safety Standards: IEC 62368-1, UL 62368-1, AS/NZS 62368-1, EAC TP TC 004 Approved Project: Vantage (Morgan Gronde MS) GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *NB: The Municipal Bidding Document 6.1 (MBD 6.1) has been amended, in order to be eligible for preference points bidders are required to submit a duly completed MBD 6.1 document with supporting documents with each and every RFQ submission.* 2 x ST/UPC - SC/UPC SINGLE MODE DUPLEX 3m fiber PATCH LEAD NON-RUGGERDISED Project: Vantage (Morgan Gronde MS) GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *NB: The Municipal Bidding Document 6.1 (MBD 6.1) has been amended, in order to be eligible for preference points bidders are required to submit a duly completed MBD 6.1 document with supporting documents with each and every RFQ submission. Delivery Date2024/06/14 Delivery ToTertius du toit 021 444 5474 Delivery Address01 Kruisfontein Road, Brackenfell Contact PersonTertius Du Toit Telephone Number0214445474 Cell Number Closing Date2024/04/02 Closing Time12:00 PM RFQ Submission Fax0000000000 RFQ Submission Fax 2 Buyer Email AddressMonja.Davids@capetown.gov.za Buyer DetailsM.Thorpe Buyer Phone0214006752 AttachmentsNo Attachments NOTE On 3 April 2018 the City of Cape Town went live with e-Procurement which was piloted with 3 commodities: Civil, Hardware, Electrical. No manual submissions will be accepted for these commodities and suppliers must log in to e-Services portal to access RFQs.Bids must be compliant with the Preferential Procurement Regulations, 2017 including but not limited to local content, functionality, price and preference, eligibility criteria and relevant statutory criteria. The details of this are contained in the RFQ document and/or the specification advertised via E-Procurement.Only locally produced goods or locally manufactured goods, meeting the stipulated minimum threshold for local production and content, will be considered, where applicable. More information can be found at https://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/283064 (Registration and Login necessary)To Register for City of Cape Town E-Procurement to submit your quotation, please see the following links:About E-ProcurementRegistering for a Municipal e-Services AccountRegister as a SupplierLogin to E-Procurement / e-Services