Salt Fork State Park Beach House

Request for Qualifications (Architect / Engineer) State of Ohio Standard Forms and Documents F110-02-2022-MAR Publish Date: 1/23/23 Page 1 of 4 Administration of Project: Local Agency Project Name Salt Fork State Park Beach House Response Deadline 2/10/2023 4:00 PM local time Project Location Salt Fork State Park Project Number DNR-230035 City / County Lore City / Guernsey Project Manager Kyle Ruha Owner Ohio Department of Natural Resources Contracting Authority Local Agency Delivery Method General Contracting Prevailing Wages State No. of paper copies requested (stapled, not bound) 0 No. of electronic copies requested (PDF) 1 Submit the requested number of Statements of Qualifications (Form F110-330) directly to engineering@dnr.ohio.gov. See Section J of this RFQ for additional submittal instructions. Submit all questions regarding this RFQ in writing to Julie Endicott at

href="mailto:engineering@dnr.ohio.gov">engineering@dnr.ohio.gov with the project number included in the subject line (no phone calls please). Questions will be answered and posted to the Opportunities page on the OFCC website at http://ofcc.ohio.gov on a regular basis until one week before the response deadline. The name of the party submitting a question will not be included on the Q&A document. Project Overview A. Project Description The Ohio Department of Natural Resources (ODNR) through the Division of Parks and Watercraft is responsible for the management of 75 state parks, including Salt Fork State Park in Guernsey County. Salt Fork State Park is at the crossroads of Interstate Routes 70 and 77, about 90 miles east of Columbus, OH and 100 miles west of Pittsburgh, PA. This the largest of Ohio’s 75 State Parks with 17,229-land acres. The park also features a 2,952-acre lake with unlimited horsepower, making it a popular destination for recreational boaters and anglers. Amenities include two marinas with seasonal dock rentals, eight launch ramps, three boater-swim areas, a 400-foot-long boater’s beach, as well as a 2,500-foot-long public beach. A star attraction is the park’s large campground with 215 campsites, ranging from full-hookups that accommodate RVs of all sizes to “primitive” tent-only sites. The park also offers a horseman’s camp with 24 campsites and 70-plus miles of bridle trails. This Request for Qualifications (RFQ) is being issued to obtain Professional Design (A/E) services for establishing a new beach house facility at Salt Fork State Park. The existing beach house, located at the entrance to the main public beach, will be demolished and replaced with a modern fully ADA accessible facility with easy access to the beach area and associated existing shelters. Provide restroom facilities, a space for point of sale, office space, splash pad area, new sidewalks to facilitate access from parking to shelters, buildings, and beach area. Incorporate a redesigned plaza area to include shade structures, picnic areas and/or benches. Associated amenities will be evaluated as budget allows. All regulatory and environmental regulations and permitting will be the responsibility of the A/E selected for this project. Archaeological assessments may be required depending on property type and location. This project is to be completed in concurrence with the Clean Air Act and Federal Water Pollution Control Act. All selected A/E firms will be required to execute a Byrd Anti-Lobbying Certification. This project incorporates funding by the American Rescue Plan Act (ARPA). All consultants and contractors will be responsible for assisting ODNR with reporting requirements. Fee negotiations will be consistent with the Federal Procurement laws. Fee ranges will vary based on delivery method and budget. B. Scope of Services For projects advertised with an appropriately developed Program of Requirements (“POR”), upon award of the Agreement, commence with Design. For projects without such a POR, upon award of the Agreement, commence by developing the Program of Requirements. The selected A/E, as a portion of its required Scope of Services and prior to submitting its proposals, will discuss and clarify with the Owner and/or the Contracting Authority, the cost breakdown of the Architect/Engineer Agreement detailed cost components to address the Owner’s project requirements. Participate in the Encouraging Diversity, Growth& Equity (EDGE) Program as required by statute and the Agreement. mailto:engineering@dnr.ohio.gov mailto:engineering@dnr.ohio.gov http://ofcc.ohio.gov/ Request for Qualifications (Architect / Engineer) continued F110-02-2022-MAR Publish Date: 1/23/23 Page 2 of 4 As required by the Agreement, and as properly authorized, provide the following categories of services: Program Verification, Schematic Design, Design Development, Construction Document Preparation, Bid and Award Support, Conformed Documents, Construction Administration, Post-Construction, and Additional Services of all types. Refer to the Ohio Facilities Construction Manual for additional information about the type and extent of services required for each. A copy of the standard Agreement can be obtained at the OFCC website at https://ofcc.ohio.gov. During the construction period, provide not less than 16 hours (excluding travel time) on-site construction administration services each week, including (1) attendance at progress meetings, (2) a written field report of each site visit, (3) on-site representation comprised of the A/E and its consultant staff involved in the primary design of the project, all having relevant and appropriate types of construction administration experience. For purposes of completing the Relevant Project Experience Matrix in Section F of the Statement of Qualifications (Form F110-330), below is a list of relevant scope of work requirements for this RFQ: 1. Experience with building design within a natural environment. 2. Experience with sustainable building design. 3. Experience with mechanical, plumbing, and electrical design. 4. Experience with park facility design requirements and aesthetics at a State Park. 5. Experience with construction administration with similar type projects. 6. Experience with construction cost-estimating/analysis for natural resource facilities, specifically with regional cost factors. 7. Experience with public construction and working with state and/or other governmental agencies. 8. Experience with stakeholder communications and public information associated with natural resources related projects. 9. Experience with expedited project schedule management. 10. Experience with design and construction of site development. C. Estimated Budget / Funding D. Anticipated Schedule State Funding: $2,600,000.00 Professional Services Start: 06 / 23 Other Funding: $0.00 Construction Notice to Proceed: 08 / 24 Construction Cost: $2,210,000.00 Substantial Completion of all Work: 11 / 25 Total Project Cost: $2,600,000.00 Professional Services Completed: 11 / 26 E. Estimated Basic Fee Range (see note below) F. EDGE Participation Goal 8% to 10% Percent of initial Total A/E Fee: 5.0% NOTE: Basic Services include: (1) Program Verification, (2) Schematic Design, (3) Design Development, (4) Construction Documents, (5) Bidding and Award OR GMP Proposal and Amendment (as applicable), (6) Construction Administration, and (7) Closeout services. The Basic Fee includes all professional design services and consultant services necessary for proper completion of the Basic Services, including validation of existing conditions (but not subsurface or hidden conditions) and preparation of cost estimates and design schedules for the project. The Estimated Basic Fee Range is calculated as a percentage of the Estimated Budget for Construction Cost above, including the Owner’s contingency. The Basic Fee excludes any Additional Services required for the project. G. Basic Service Providers Required (see note below) H. Additional Service Providers Required Lead A/E Discipline: Architecture QA/QC Testing Secondary Mechanical-Electrical-Plumbing Eng. Geotechnical Services Disciplines: Structural Engineering Water Feature Design Landscape Architecture Special Testing and Inspections (OBC CH.17) Civil Engineering Surveying NOTE: The lead A/E shall be (1) an architect registered pursuant to ORC Chapter 4703, (2) a landscape architect registered pursuant to ORC Chapter 4703, or a (3) professional engineer or (4) professional surveyor licensed pursuant to ORC Chapter 4733. I. Evaluation Criteria for Selection https://ofcc.ohio.gov/ Request for Qualifications (Architect / Engineer) State of Ohio Standard Forms and Documents F110-02-2022-MAR Publish Date: 1/23/23 Page 3 of 4 • Demonstrated ability to meet Owner’s programmed project vision, scope, budget, and schedule on previous projects. • Previous experience compatible with the proposed project (e.g., type, size). • Relevant past work of prospective firm’s proposed consultants. • Past performance of prospective firm and its proposed consultants. • Qualifications and experience of individuals directly involved with the project. • Proposer’s previous experience (numbers of projects, sizes of projects) when working with its proposed consultants. • Specification writing credentials and experience. • Experience and capabilities of creating or using Critical Path Method (CPM) schedules and of using CPM schedules as a project management resource. • Approach to and success of using partnering and Alternative Dispute Resolution. • Proximity of prospective firms to the project site. • Proposer’s apparent resources and capacity to meet the needs of this project. • The selected A/E and all its consultants must have the capability to use the Internet within their normal business location(s) during normal business hours. Interested A/E firms are required to submit the Commitment to Participate in the EDGE Business Assistance Program form in its Statement of Qualifications (Form F110-330) submitted in response to the RFQ, to indicate its intent to contract with and use EDGE-certified Business Enterprise(s), as a part of the A/E’s team. The Intent to Contract and to Perform and / or waiver request letter and Demonstration of Good Faith Effort form(s) with complete documentation must be attached to the A/E’s Technical Proposal. Both forms can be accessed via the OFCC website at https://ofcc.ohio.gov. The Intent to Contract and to Perform form is again required at the Fee Proposal stage. If the A/E firm intends to receive points for exceeding the EDGE Participation Goal, it must provide BOTH a completed Commitment to Participate form AND a completed Statement of Intent to Contract and to Perform forms signed by both parties with its Statement of Qualifications. For all Statements of Qualifications, please identify the EDGE-certified Business Enterprises, by name, which will participate in the delivery of the proposed professional services solicited in the RFQ. Interested A/E firms must indicate on their Statement of Qualifications, the locations where their services will be performed in the spaces provided or by attachment in accordance with the requirements of Executive Order 2019-12D related to providing services only within the United States and the requirements of Executive Order 2022-02D prohibiting purchases from or investment in any Russian institution or company. Failure to do so may cause their Statement of Qualifications to be rejected. J. Submittal Instructions Firms are required to submit the current version of Statement of Qualifications (Form F110-330) available via the OFCC website at https://ofcc.ohio.gov. Electronic submittals should be combined into one PDF file named with the project number listed on the RFQ and your firm’s name. Use the “print” feature of Adobe Acrobat or similar software for creating a PDF rather than using a scanner. If possible, please reduce the file size of the PDF. In Acrobat, go to Advanced, then PDF Optimizer. Also, please insert the project number and firm name followed by “SOQ” in the email subject line. Statements of Qualifications must be submitted electronically by email. Submittals are limited to one email with a maximum file size of 25 MB. Firms are requested to identify professional registrations, memberships and credentials including: LEED GA, LEED AP, LEED AP+, CCCA, CCM, CCS, CDT, CPE, DBIA, and any other appropriate design and construction industry credentials. Identify that information on the resume page for individual in Block 22, Section E of the F110-330 form. https://ofcc.ohio.gov/ https://ofcc.ohio.gov/ Architect / Engineer Selection Rating Form State of Ohio Standard Forms and Documents F110-02-2022-MAR Publish Date: 1/23/23 Page 4 of 4 Project Name Salt Fork State Park Beach House Proposer Firm Project Number DNR-230035 City, State, Zip Selection Criteria Value Score 1. Primary Firm Location, Workload and Size (Maximum 10 points) a. Proximity of firm to project site Less than 150 miles 5 150 miles to 200 miles 2 More than 200 miles 0 b. Amount of fees awarded by Contracting Authority in previous 24 months Less than $500,000 2 $500,000 to $1,000,000 1 More than $1,000,000 0 c. Number of licensed professionals Less than 5 professionals 3 Max = 3 5 to 10 professionals 2 More than 10 professionals 1 2. Primary Firm Qualifications (Maximum 30 points) a. Project management lead Experience / ability of project manager to manage scope / budget / schedule / quality 0 - 10 b. Project design lead Experience / creativity of project designer to achieve owner’s vision and requirements 0 - 10 Max = 20 c. Technical staff Experience / ability of technical staff to create fully coordinated construction documents 0 - 5 d. Construction administration staff Experience / ability of field representative to identify and solve issues during construction 0 - 5 3. Key Consultant Qualifications (Maximum 20 points) a. Key discipline leads Experience / ability of key consultants to perform effectively and collaboratively 0 - 15 b. Proposed EDGE-certified Consultant participation* One point for every 2 percent increase in professional services over the EDGE participation goal 0 - 5 4. Overall Team Qualifications (Maximum 10 points) a. Previous team collaboration Less than 2 sample projects 1 Max = 3 2 to 6 sample projects 2 More than 6 sample projects 3 b. LEED** Registered / Certified project experience Registered LEED v4.0 or v4.1 projects 1 Max = 2 Certified LEED v4.0 or v4.1 projects 2 c. BIM project experience Training and knowledge 1 Max = 3 Direct project experience 3 d. Team organization Clarity of responsibility / communication demonstrated by table of organization 0 - 2 5. Overall Team Experience (Maximum 30 points) a. Previous team performance Past performance as indicated by evaluations and letters of reference 0 - 10 b. Experience with similar projects / delivery methods Less than 4 projects 0 - 3 4 to 6 projects 4 - 6 More than 6 projects 7 - 10 c. Budget and schedule management Performance in completing projects within original construction budget and schedule 0 - 5 d. Knowledge of Ohio Capital Improvements process Less than 3 projects 0 - 1 3 to 6 projects 2 - 3 More than 6 projects 4 - 5 * Must be comprised of professional design services consulting firms and NOT the lead firm - For more information on scoring this and other criteria refer to Document F199-01 - PS Selection Rating Rubric. ** Leadership in Energy & Environmental Design administered by Green Business Certification Inc. Subtotal Notes: Evaluator: Name Signature Date https://ofcc.ohio.gov/Portals/0/Documents/Forms/Procurement/F199-01-RFQ_Rubric_2021.pdf