CLOTH, WOVEN ROVING

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 23 PAGES SPE1C1-23-T-1955 SECTION B PR: 7003459294 NSN/MATERIAL:8305016230445 ITEM DESCRIPTION CLOTH,WOVEN ROVING NSN 8305-01-623-0445; Cloth, Woven Roving; Nylon Aramid (Nomex); Natural/Off-White; 5.5 Ounces Per Square Yard Maximum Weight; 0.0095 +/- 0.001 Inches Thickness; 1.0 Inches Width; 21 Warp/18 Fill Pounds Minimum Tear Strength; 216 Warp/200 Fill Pounds Per Inch Width Tensile Strength; 100 Yards Minimum Length Of Roll; DMS 2357B; Type I, Class I; RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES 1 RO = 100 YD PROCURE FROM: Part Number: HT-1 Cage CODE: 92602 Part Number: S/9053 Cage CODE: 0AK95 or equivalent WHEN REQUIRED, CLOTH TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH DPSCM-4155.3 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED(>,)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT. RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION(>,)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS. PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000 . LABEL TAG: PRESSURE -SENSITIVE LABEL, SMOOTH FINISH WHITE PAPER, RUBBER-BASED ADHESIVE WITH HIGH INITIAL TACK, BASIS WEIGHT 20 POUNDS, BAR CODED TAG, PAPER(>,)> STANDARD BLEACH SULFATE, BASIS WEIGHT 100 POUNDS(>,)> BAR CODED. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 23 PAGES SPE1C1-23-T-1955 SECTION B MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM. NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS. THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS: BAR CODE OMITTED OR NOT READABLE BY SCANNER HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075. IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075. INDIVIDUAL NSN DATA NSN 8305-01-623-0445, PGC36678 ITEM DESCRIPTION ITEM NAME: Cloth, Woven Roving Part Number: HT-1 Cage CODE: 92602 Part Number: S/9053 Cage CODE: 0AK95 PRESERVATION, PACKAGING AND PACKING SEE PREPARATION FOR DELIVERY. STERN & STERN INDUSTRIES, INC 92602 P/N HT-1 BUFFALO INDUSTRIAL FABRICS INC 0AK95 P/N S/9053 CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7003459294 0001 RO 1.000 NSN/MATERIAL:8305016230445 DELIVERY (IN DAYS):0005 DELIVER FOB: ORIGIN QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:00 OPI:O INTRMDTE CONT:E8 INTRMDTE CONT QTY:000 PACK CODE: PACKING LEVEL: B MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 23 PAGES SPE1C1-23-T-1955 SECTION B PR: 7003459294 PRLI: 0001 CONT’D PRES/PACK C/C TO ASTM-D-3951 AND ASTM-D-5118. . . LABEL TAG: PRESSURE -SENSITIVE LABEL, SMOOTH FINISH WHITE PAPER, RUBBER-BASED ADHESIVE WITH HIGH INITIAL TACK, BASIS WEIGHT 20 POUNDS, BAR CODED TAG, PAPER(>,)> STANDARD BLEACH SULFATE, BASIS WEIGHT 100 POUNDS(>,)> BAR CODED. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM. NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS. THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS: BAR CODE OMITTED OR NOT READABLE BY SCANNER HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075. IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075. FREIGHT FORWARDER: DUK002 KUEHNE + NAGEL UKDPO REPRESENTATIVE 22920 LADBROOK DRIVE SUITE 120 DULLES VA 20166 US FREIGHT SHIPPING ADDRESS: DUKF00 OC SUPPLY SQUADRON C 17 HANGAR 74 RAF BRIZE NORTON OXON OX18 3LX UK GB MARKFOR DUKF00 OC SUPPLY SQUADRON C 17 HANGAR 74 RAF BRIZE NORTON CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 23 PAGES SPE1C1-23-T-1955 SECTION B PR: 7003459294 PRLI: 0001 CONT’D OXON OX18 3LX UK GB M/F: (TCN) DUKF5V31776811 RDD: A01 PROJ: TP 1 SUPP ADD: DA2KGC SIG: L FOR GOVERNMENT USE ONLY: (IPD) 03 DIC: A31 DIST: N02 ADV: 2A FC: NL Need Ship Date:00/00/0000 Original Required Delivery Date:06/30/2023 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 23 PAGES CONTINUED ON NEXT PAGE SPE1C1-23-T-1955