HOSE, AIR DUCT

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 26 PAGES SPE7M4-24-T-067L SECTION A GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR 52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES – REPRESENTATION. Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses DFARS 252.225-7006,

252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation. DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories: (A) Small business; (B) Service-disabled veteran-owned small business; (C) Women-owned small business (WOSB) under the WOSB Program; (D) Economically disadvantaged women-owned small business under the WOSB Program; or (E) Historically underutilized business zone small business. Contractors shall not provide parts and supplies made using additive CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 26 PAGES SPE7M4-24-T-067L SECTION A manufacturing (AM), unless AM is specifically authorized in the solicitation/contract. See procurement note L31. Procurement History for NSN/FSC:010576200/4720 CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material . 99135 SPE7M421P2113 74.000 17.05000 20210914 N 99135 SPE7M113V2831 214.000 12.44000 20130614 N 99135 SPM7M113V7339P00001 116.000 12.44000 20130423 N 99135 SP074003MHG30 78.000 6.90000 20030226 N 99135 SP074002MHL72 35.000 7.98000 20020819 N 65407 SP074095M1462 177.000 7.23000 19950602 N 65407 SP074095M0481 85.000 7.24000 19950118 N 99135 DLA70090MA528 113.000 4.32000 19891113 N 16632 DLA70082MDH23 341.000 3.30000 19820607 N 16632 DLA70082MB343 50.000 4.04000 19811208 N 15761 DLA70082M2072 7.000 15.52000 19811015 N 98891 DLA70078MA585 46.000 3.88000 19780830 N CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 26 PAGES SPE7M4-24-T-067L SECTION B PR: 7006502455 NSN/MATERIAL:4720010576200 ITEM DESCRIPTION HOSE,AIR DUCT HOSE, AIR DUCT, 3/4 IN. ID, 8 IN. O/A LG, SOFT ENDS 1 IN. LG, COPIES OF REFERENCED DOCUMENTS MAY BE OBTAINED FROM: NATIONAL AEROSPACE STANDARDS COMMITTEE, AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1725 DE SALES N.W. WASHINGTON, D.C. 20036 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. FULL AND OPEN COMPETITION APPLY CONTRACTOR FAT IS REQUIRED IAW SQAPNAS1369. PER FAR 52.209-3: (A) THE CONTRACTOR SHALL TEST 1 UNIT(S). AT LEAST 10 CALENDAR DAYS BEFORE THE BEGINNING OF FIRST ARTICLE TESTING, THE CONTRACTOR SHALL CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 26 PAGES SPE7M4-24-T-067L SECTION B NOTIFY THE CONTRACTING OFFICER, IN WRITING, OF THE TIME AND LOCATION OF THE TESTING SO THAT THE GOVERNMENT MAY WITNESS THE TESTS. (B) THE CONTRACTOR SHALL SUBMIT THE FAT REPORT WITHIN 60 CALENDAR DAYS# (NOTE: THE DELIVERY SCHEDULE ON THE FACE OF THE SOLICITATION REFLECTS ONLY THE TIME TO DELIVER THE SUPPLIES.) WITHIN 30 CALENDAR DAYS AFTER THE GOVERNMENT RECEIVES THE FIRST ARTICLE THE CONTRACTING OFFICER SHALL NOTIFY THE CONTRACTOR(>,)> IN WRITING, OF THE APPROVAL, CONDITIONAL APPROVAL, OR DISAPPROVAL OF THE FIRST ARTICLE. PER DLAD 52.209-9017, ALT III DISPOSITION OF FIRST ARTICLES: THE CONTRACTOR SHALL RETAIN ALL FIRST ARTICLE UNITS. AFTER RECEIPT OF QUOTES, OFFERORS MAY BE CONTACTED TO PRICE THE FAT REQUIREMENT. CRITICAL APPLICATION ITEM IAW BASIC NON GOVT STD NAS1370 THRU 1379 REVISION NR 5 DTD 09/30/2021 PART PIECE NUMBER: NAS1374A03SE024 IAW REFERENCE NON GOVT STD NAS1369 REVISION NR 4 DTD 05/31/2023 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAPNAS1369 REVISION NR DTD 04/29/2009 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 9 OF 26 PAGES SPE7M4-24-T-067L SECTION B PART PIECE NUMBER: CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7006502455 0001 EA 10.000 NSN/MATERIAL:4720010576200 DELIVERY (IN DAYS):0110 DELIVER FOB: ORIGIN QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:BV OPI:O INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:Q PACKING LEVEL: B MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT FREIGHT FORWARDER: DIS002 GOI MOD G&B PACKING COMPANY 1A COLONY ROAD JERSEY CITY NJ 07305 US FREIGHT SHIPPING ADDRESS: DISB00 GOVERNMENT OF ISRAEL MINISTRY OF DEFENSE LATZAD METOSIM IL MARKFOR DISB00 GOVERNMENT OF ISRAEL MINISTRY OF DEFENSE LATZAD METOSIM IL M/F: (TCN) DISB5N40501014 RDD: A02 PROJ: 516 TP 3 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 10 OF 26 PAGES SPE7M4-24-T-067L SECTION B PR: 7006502455 PRLI: 0001 CONT’D SUPP ADD: DA2REA SIG: L FOR GOVERNMENT USE ONLY: (IPD) 12 DIC: A31 DIST: N01 ADV: FC: NL Need Ship Date:00/00/0000 Original Required Delivery Date:02/23/2024 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTRACTOR FIRST ARTICLE TEST - THE NUMBER OF UNITS SHOWN SIGNIFIES THE TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED. CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0002 0000000000 EA 1.000 NSN/MATERIAL:0001S00000053 DELIVERY (IN DAYS):0060 THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM. THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN SECTION A OF THIS SOLICITATION. DELIVER FOB: ORIGIN QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 26 PAGES CONTINUED ON NEXT PAGE SPE7M4-24-T-067L