CGC KANAWHA MDE NO CRANK, ZF CEAR COMMAND BOX REPLACEMENT

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z0-8522-Q-LRE1340900 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013. The NAICS Code is 336611. The small business size standard is 1250. This is a total small business set aside. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. Past Performance will be considered when evaluating vendors.The United States Coast Guard Surface Force

Logistics Center has a requirement for the following SERVICES for CGC KANAWHA:Both MDEs No Crank, ZF Clear Command Box Replacement  1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to remove the old ZF 96204 control box, program and install new ZF 96204.1.2 Period of Performance. Preferred dates as listed:Primary: 18Jan2022Secondary: 25Jan20222. REFERENCES COAST GUARD PUBLICATIONS Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General RequirementsSurface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship StructuresClear Command 96204 - Installation Manual - Multiple Class Cutter 4904A_252_A3. REQUIREMENTS Protective measures. The Contractor must furnish and install all protective measures in accordance with SFLC Std Spec 0000, (Vessel component, space, and equipment protection).Interferences. The Contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences). Known interferences include, but are not limited to the following:• System refrigerant• System cooling water• Piping• Bulkheads• Insulation• Compressors• Receivers• Foundations• Ventilation Ducting• Electrical WiringGuidance. The Contractor shall refer to CG Drawings for location shipboard configuration and variations.Safety. The Contractor shall familiarize themselves with and comply with applicable requirements invoked in CG TP 3363 (particularly associated WARNINGS, CAUTIONS and NOTES).The Contractor shall un-install existing cylinders in accordance with requirements found in applicable portions of CG Drawings.Installation. Prior to installation, the Contractor shall remove old ZF 96204 control box (CG will provide new ZF 96204 control box) with their own provide tools/equipment: 4101 Port Rd Pine Bluff, AR. 71601. Contractor shall then on install and program new ZF 96204 control box onboard ship applicable to configuration drawings.Operational test, post repairs. After completion of work and in the presence of the Coast Guard Inspector (EPO/APO), the Contractor must thoroughly test, make any adjustments, and demonstrate the equipment to be in satisfactory operating condition.RDD: 21-23 March, 2022If there are parts to ship please see below.Shipping charges and lead time to PINE BLUFF, AR. 71601***Include ALL shipping fees in the total cost.*** ***REFER TO DETAILED SCOPE OF WORK ATTACHED******Drawings will be provided upon request if there are requirements for this solicitation.***Questions and quotes shall be emailed to Emily.E.Greenhouse@uscg.mil and BARBARA.FALERO@uscgmil . Contractors are responsible for verifying receipt of quotes.INTERESTED VENDORS PLEASE SIGN AN OFFICIAL QUOTE WITH A SAM.GOV REGISTERED DUNS NUMBER AND EMAIL TO Emily.E.Greenhouse@uscg.mil and  BARBARA.FALERO @uscgmil .