Gun Safes for Veterans

25 May 2023 Gun Safes for Veterans Gun Safes for Veterans as part of a Suicide Presentation and Awareness Campaign 25 May 2023 Open 5/25/2023 2:00 PM MDT Type Invitation for Bid Close 6/1/2023 2:00 PM MDT Number RR23-58 Currency US Dollar Sealed Until 6/1/2023 2:00 PM MDT 25 May 2023 Contacts Ryan Reeder rreeder@utah.gov 25 May 2023 Commodity Codes Commodity Code Description 46100 Light weapons, ammunition including all types of handguns, rifles, shotguns, all types of targets, accessories 44120 Office supplies including folders and binders and mailing supplies and desk supplies and writing instruments, print services 46180 Personal safety and protection equipment and supplies including safety apparel 52140 Domestic appliances including kitchen and laundry appliances 25 May 202325 May 202325 May 202325 May 202325 May 202325 May 202325 May 202325 May 202325 May 2023 mailto:

href="mailto:rreeder@utah.gov">rreeder@utah.gov Issuing Procurement Unit State of Utah Division of Purchasing Conducting Procurement Unit Department of Veteran and Military Affairs (VMA) INVITATION FOR BIDS Gun Safes for Veterans SOLICITATION #RR23-58 This Invitation for Bids "IFB" is issued in accordance with State of Utah Procurement Code and the Utah Administrative Code. If any provision of this IFB conflicts with the Utah Procurement Code or the Utah Administrative Code, then Utah Procurement Code and then Utah Administrative Code will take precedence. Purpose of this Solicitation The purpose of this IFB is to enter into a contract with the lowest responsive and responsible bidder to provide: 25 safes capable of storing up to twelve rifles and 175 safes capable of storing two handguns. Both safe types shall have at least two different mechanisms/methods to open and lock. These safes will be delivered to various locations throughout the state as per the Scope of Work (Attachment B) This IFB will result in one Purchase Order for the safes with delivery to multiple locations throughout the state of Utah Closing date and time The closing date and time for this sourcing event is as provided in this posting. If your time is different from that shown, your profile may be set to a different time zone. Please see the attachment titled "Changing Your Time Zone" in the Buyer Attachments section for directions on how to update your profile. It is your responsibility to make sure you submit your response by the date and time indicated above. Length of the Contract The IFB will result in One (1) Purchase Order for the safes with expected delivery to multiple locations throughout the state. Background Currently, the Utah Service Members, Veterans and Families (SMVF) population has access to cable locks to help secure firearms. The Utah Department of Veteran and Military Affairs would like to go another step further and purchase gun safes, store them throughout the state, and allow SMVF to pick up, at no cost to them. The target audiences are individuals at risk of suicide, family members who are concerned about a loved one, and those who do not currently have a gun safe but want an extra safety measure for children in the home. Issuing Procurement Unit, Conducting Procurement Unit, and Solicitation Number The State of Utah Division of Purchasing is the issuing procurement unit and VMA is the conducting procurement unit for this IFB (referred to as “the State”). The reference number for this IFB is Solicitation #RR23-58. This solicitation number must be referred to on all bids, correspondence, and documentation submitted to the State relating to this IFB. Any solutions that include cloud services, IaaS, PaaS, SaaS, MaaS, CaaS & XaaS, etc. must be implemented using the existing State of Utah DTS accounts for those hosted services, where possible. DTS has accounts with most major cloud producers (AWS, GCP, Azure, etc.). It is expected that State of Utah data reside on the DTS managed accounts for these and all providers. If applicable, please ensure that the solicitation response incorporates the use of these DTS accounts and that the pricing quoted does not include vendor hosting costs as costs would be paid directly to the hosting providers through DTS' existing accounts. If it is not possible to utilize the DTS cloud services accounts, please provide the reasoning why to the solicitation’s Q&A board so as to allow the State to amend this solicitation requirement if appropriate. If the State of Utah Department of Technology Services is conducting this IFB then the Department of Technology Services has the authority to allow any and all State of Utah Executive Branch Agencies to participate in any contract resulting from this IFB in the event a procurement need arises. Allowing additional Executive Branch Agencies to participate in a contract resulting from this IFB will require a contract amendment and participation will be limited to the procurement items or scope of work identified in this IFB. Description All technology contract amendments will be issued in accordance with State of Utah Technology Governance Act § 63F-1-205, Utah Procurement Code, and Utah Administrative Rule R33-12-502. Additional Information Bidders are prohibited from communications regarding this IFB with the conducting procurement unit staff, evaluation committee members, or other associated individuals EXCEPT the State of Utah Division of Purchasing procurement officer overseeing this IFB. Wherever in this IFB an item is defined by using a trade name, brand name, or a manufacturer and/or model number, it is intended that the words, “or equivalent” apply; and invites the submission of equivalent products by the Bidders. Bidders may be required to submit product samples to assist the chief procurement officer or head of a procurement unit with independent procurement authority in evaluating whether a procurement item meets the specifications and other requirements set forth in the invitation to bid. Product samples must be furnished free of charge unless otherwise stated in the invitation for bids, and if not destroyed by testing, will upon written request within any deadline stated in the invitation for bids, be returned at the bidder's expense. Samples must be labeled or otherwise identified as specified in the invitation for bids by the procurement unit. New Technology Pursuant to Utah Administrative Rule R33-12-502 the awarded contract(s) may be modified to incorporate new technology or technological upgrades associated with the procurement item being solicited, including new or upgraded: (i) systems; (ii) apparatuses; (iii) modules; (iv) components; and (v) other supplementary items. Further, a maintenance or service agreement associated with the procurement item under the resulting contract(s) may be modified to include any new technology or technological upgrades. Any contract modification incorporating new technology or technological upgrades will be specific to the procurement item being solicited and substantially within the scope of the original procurement or contract. Legislative Appropriations Additional funding may be added to the awarded contract(s) if additional funding is provided to the procurement unit for the purpose identified in the scope of work by the legislature. Evaluation of Bids Each bid received shall be evaluated for responsiveness in as outlined in the Utah Procurement Code. This IFB shall be evaluated by the objective criteria described in this IFB. Bids submitted must comply with the prerequisites and questions sections of this IFB. Any bid that does not comply with the prerequisite and questions sections will be deemed non-responsive and will be rejected. Multiple or alternate bids will not be accepted, unless otherwise specifically required or allowed in the invitation for bids. If a bidder submits multiple or alternate bids that are not requested in this IFB, the chief procurement officer or head of a procurement unit with independent procurement authority will only accept the bidder's primary bid and will not accept any other bids constituting multiple or alternate bids. Any exceptions to the content of this IFB, including the prerequisites, must be protested in writing to the Division of Purchasing prior to the closing date. To be responsive and responsible Bidders must review and respond to the following sections of this IFB: Prerequisites, Buyer Attachments, Questions, and Items.  The Prerequisites Section contains the objective criteria that will be used to evaluate the bids, including the mandatory minimum requirements and general requirements that Bidders must certify that they have read, understand, and agree to in order to submit a bid.  The Buyer Attachments Section contains the required State of Utah Terms and Conditions of the IFB, which are non- negotiable, and other documents required for this IFB.  The Questions Section contains the questions that Bidders are required to answer in order to submit a bid.  The Items Section contains the detailed description of the procurement items being sought and allows the Bidders to provide their bids. Bidders must review each section of this IFB carefully. Required to View Event Prerequisites Required to Enter Bid 25 May 2023 1. Bidders are encouraged to review this IFB prior to the deadline to submit a bid, even if a bid has been submitted, in case an addendum has been issued by the issuing procurement unit. 2. All questions must be submitted through SciQuest during the Question and Answer period. 3. A Bidder must guarantee its pricing for the period described in this IFB. 4. Bidders must accept the Standard Terms and Conditions that have been attached to this IFB. See Buyer Attachments Section. 5. The Scope of Work has been attached to this IFB. See Buyer Attachments section. 6. Any Bidder requesting that part of its bid be protected shall include with the bid a Claim of Business Confidentiality. See Questions Section for uploading a Claim of Business Confidentiality form. 7. The mandatory minimum requirements are the objective criteria in which the conducting procurement unit will evaluate bids. Bidders must upload a document which provides a point by point response to the mandatory minimums listed in this prerequisite. 8. The issuing procurement unit may not accept a bid after the time for submission of a bid has expired. 9. Bids must be submitted electronically, through SciQuest. 10. The cost for this IFB will be evaluated as described in this prerequisite. 11. Bids will be opened in accordance with Utah Code 63G-6a-604. 25 May 202325 May 202325 May 202325 May 202325 May 202325 May 202325 May 2023 Buyer Attachments 1. Claim of Business Confidentiality 12.7.20.pdf 2. Changing Your Time Zone 2022.pptx 3. Attachment A - Terms and Conditions for Goods (Purchase Orders) 4. Attachment B - Scope of Work.pdf 25 May 202325 May 202325 May 202325 May 202325 May 202325 May 2023 https://bids.sciquest.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMTQ4MzY1LTEwMTgxODU2NjlDbGFpbSBvZiBCdXNpbmVzcyBDb25maWRlbnRpYWxpdHkgMTIuNy4yMC5wZGY%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids.sciquest.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMTQ4MzY1LTExOTY4MzEyMjRDaGFuZ2luZyBZb3VyIFRpbWUgWm9uZSAyMDIyLnBwdHg%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids.sciquest.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMTQ4MzY1LTE0MjAxMjc3OTB0ZXJtc3BvZ29vZHMtMDUwMjIwMjNfUlMuZG9jeA%3D%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids.sciquest.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMTQ4MzY1LTE0MzIwMTI5MzNBdHRhY2htZW50IEIgLSBTY29wZSBvZiBXb3JrLnBkZg%3D%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 Questions Required Questions Group 1: Acceptance of Prerequisites Instructions: 1.1 Offeror acknowledges that it is the offerors responsibility to upload any and all documents in responding to the solicitation. If the vendors fails to upload a document, uploads an incorrect document, uploads a blank document, or uploads any document incorrectly the State of Utah may not allow the vendor to make changes following the closing of the solicitation. 1.2 Offeror acknowledges that they do not have financial ties to individuals or entities on anOFAC sanctions list. 1.3 Is Bidder presently or has Bidder ever been debarred, suspended, proposed for debarment, or declared ineligible by any governmental department or agency, whether international, national, state, or local? If yes, Bidder must provide a statement regarding its debarment or suspension. 1.4 In accordance with Utah Code 63G-27-102, vendors contracting with the State to provide any good or service, including supplies, information technology, or construction services, must certify they are not currently engaged in an “economic boycott” nor a “boycott of the State of Israel” as those terms are defined in that Code section. Vendors must also agree not to engage in either boycott for the duration of the contract (if awarded). For example, a vendor may not, without an ordinary business purpose, boycott the State of Israel or companies engaged in: activities related to traditional energy, mining, agriculture; or the manufacture, distribution, sale, or use of firearms; or does not meet environmental standards beyond applicable state and federal laws; or does not facilitate access to abortion or sex characteristic surgeries. If a vendor does engage in such a boycott, it must immediately notify the public entity party to the contract in writing. 1.5 If Offeror has any information that is not already provided within its proposal that if known to the State would impact the State’s determination on offeror’s responsiveness for a contract award (i.e., legal action, recent turn-over in major personnel, loss of a major contract, any alleged violations of federal, state or local regulations, etc.), please mark “yes” to this question and upload such information in the space provided below. Otherwise, please mark “no”. Please see UCA 63G-6a-120 & 902 for additional details. 1.6 Please upload information impacting Offeror’s responsiveness here. 1.7 Bidder acknowledges that it must acquire and maintain all applicable federal, state, and local licenses before the contract is entered into. Licenses must be maintained throughout the entire contract period. Persons doing business as an Individual, Association, Partnership, Corporation, or otherwise shall be registered with the Utah State Division of Corporations and Commercial Code. NOTE: Forms and information on registration may be obtained by calling (801) 530-4849 or toll free at 877-526-3994, or by accessing: www.commerce.utah.gov. 1.8 Does Bidder have an outstanding tax lien in the State of Utah? If yes, Bidder must provide a statement regarding its debarment or suspension. Group 2: Vendor Information Instructions: 2.1 Please provide your firm's legal company name. 2.2 Please provide your federal tax identification number? (If the vendor is sole proprietor please do not provide your social security number.) 2.3 Please provide your firm's contact information for this contract, including the name, phone number, and email address of your firm's authorized representative. 2.4 Please provide your ordering address and the remit to address. Please clearly identify each address. 2.5 Please provide your firm's State of Utah Sales Tax ID Number. If you do not have a State of Utah Sales Tax ID Number, please write "N/A". 2.6 Identify your firm's type of business. 2.7 Is Offeror (owners, principles, partners) a retiree currently receiving benefits through the Utah Retirement Systems (URS)? 2.8 Is Bidder an employee of the State of Utah? If yes, then Offeror must submit an external employment form signed by Offerors manager at the State of Utah. Group 3: Vendor's Submission Instructions: 25 May 202325 May 202325 May 202325 May 202325 May 2023 3.1 Bidder understands and acknowledges that if Bidder accessed the "View as PDF" document available on the Utah Public Procurement Place Business Opportunities website and did not login to Bidder's account in the Utah Public Procurement Place system, that Bidder may not be viewing the entire the sourcing event and therefore may not be viewing the complete sourcing event requirements. Bidder acknowledges that Bidder has logged into Utah Public Procurement Place account and viewed the full sourcing event requirements including hyperlinks before submitting a response to a sourcing event. 3.2 Potential Conflicts of Interest. Offeror must identify any conflict, or potential conflict of interest, that might arise during the contract. If no conflicts are identified or expected, write “None” in this section. 3.3 Offeror affirms that yes that pursuant to the Code of Federal Regulations 2 CFR 200.216 - Prohibition on certain telecommunication and video surveillance services or equipment, that none of the goods (including component parts) or services offered within its proposal are from the entity Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities). 3.4 Vendor understands and acknowledges that its response, including all uploaded documents, will not be considered received by the State of Utah unless the Vendor clicks submit. Even if Vendor uploads all required documents and responds to all required questions its response will not be considered if it does not click submit. Offeror acknowledges that after completing the solicitation it must click on the link in the left hand menu bar labeled “Review & Submit”, then check the box under the “Certification” heading to certify their bid. Then click the blue box labeled “Submit Response” in order to submit their bid. Once the response has been submitted, Vendor will receive a confirmation that the response was successfully submitted. Vendors who fail to submit their response will not have their response reviewed and will be ineligible for further consideration under this solicitation. Group 4: Mandatory Minimum Requirements Instructions: 4.1 Vendor has read and understands the Scope of Work as found in Scope of Work Attachment B. 4.2 Offeror understands they must provide 25 Gun safes to store up to twelve rifles with at least two different methods of locking/unlocking (electronic/digital, biometric, or key). Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16” that will be shipped and delivered to multiple locations across the state. 4.3 Offeror understands they must provide 175 Gun safes to store two handguns with at least two different methods of locking/unlocking (electronic/digital, biometric, or key). Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” that will be shipped and delivered to multiple locations across the state. 4.4 Offeror understands delivery of goods will be to various storage locations across that state to public, state, and federal facilities as detailed in the Scope of Work Attachment B. 25 May 202325 May 202325 May 202325 May 202325 May 2023 Product Line Items Product Line Items 1. # Item Name, Commodity Code, Description Allow Alternates Qty. UOM Requested Delivery P1 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16” 2 EA - Each Delivery to: 12953 South Minuteman Drive Draper, UT 84020 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P2 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 10 EA - Each Delivered to: 12953 South Minuteman Drive Draper, UT 84020 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P3 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16” 5 EA - Each Delivery to: 765 North 2200 West Building 218 Salt Lake City, UT 84116 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P4 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 10 EA - Each Delivery to: 765 North 2200 West Building 218 Salt Lake City, UT84116 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P5 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16” 2 EA - Each Delivery to: 17800 South Camp Williams Road Building 7150 Bluffdale, UT 84065 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P6 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 5 EA - Each Delivery to: 17800 South Camp Williams Road Building 7150 Bluffdale, UT 84065 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P7 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16” 1 EA - Each 25 May 202325 May 202325 May 202325 May 2023 Delivery to: 625 East 5300 South Ogden, UT 84405 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P8 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 8 EA - Each Delivery to: 625 East 5300 South Ogden, UT 84405 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P9 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16 3 EA - Each Delivery to: 2801 North Main Street Spanish Fork, UT 85660 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P10 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 10 EA - Each Delivery to: 2801 North Main Street Spanish Fork, UT 85660 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P11 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16” 1 EA - Each Delivery to: 620 West 200 South Richfield, UT 84701 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P12 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 5 EA - Each Delivery to: 620 West 200 South Richfield, UT 84701 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P13 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16" 1 EA - Each Delivery to: 1065 North Airport Road Cedar City, UT 84721 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P14 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 5 EA - Each 25 May 202325 May 202325 May 202325 May 2023 Delivery to: 1065 North Airport Road Cedar City, UT 84721 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P15 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16" 2 EA - Each Delivery to: 1710 East Commerce Drive St. George, UT 84790 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P16 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 7 EA - Each Delivery to: 1710 East Commerce Drive St. George, UT 84790 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P17 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16" 3 EA - Each Delivery to: 7602 South Airport Road West Jordan, UT 84084 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P18 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 12 EA - Each Delivery to: 7602 South Airport Road West Jordan, UT 84084 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P19 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16" 3 EA - Each Delivery to: 17800 South Camp Williams Road Building 9500 Camp Williams, UT 84065 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P20 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 12 EA - Each Delivery to: 17800 South Camp Williams Road Building 9500 Camp Williams, UT 84065 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P21 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16" 1 EA - Each 25 May 202325 May 202325 May 202325 May 2023 Delivery to: 220 South 500 East Vernal, UT 84078 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P22 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 3 EA - Each Delivery to: 220 South 500 East Vernal, UT 84078 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P23 12 Gun Safe - Safe exterior dimensions should be (H x W x D) 60” x 18.25” x 16" 1 EA - Each Delivery to: 10 West Freedom Way Blanding, UT 84511 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P24 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 3 EA - Each Delivery to: 10 West Freedom Way Blanding, UT 84511 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P25 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 40 EA - Each Delivery to: 550 South Foothill Drive Suite 105 Salt Lake City, UT 84113 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. P26 Handgun Safe - Safe exterior dimensions should be (H x W x D) 2.75” x 11.75” x 10” 35 EA - Each Delivery to: 1240 6th Street Hill AFB, UT 84056 Pricing for goods should be all-inclusive and should include CONTRACTOR’s cost for shipping, storage, handling and delivery F.O.B. destination freight pre-paid with all transportation and handling charges paid by the CONTRACTOR. 25 May 202325 May 202325 May 202325 May 2023 Service Line Items Service Line Items There are no Items added to this event. 25 May 202325 May 202325 May 2023