Maritime Recruiting Services

02 April 2024 Multiphoton Customized (MPC) Microscope Multiphoton Customized (MPC) Microscope 02 April 2024 Open 4/2/2024 2:00 PM CDT Type Invitation to Bid Close 4/10/2024 2:00 PM CDT Number 28-EQUI-ITB-1469 Currency US Dollar Sealed Until 4/10/2024 2:00 PM CDT 02 April 2024 Contacts Mary Williams ME-WILLIAMS@TAMU.EDU Phone +1 979-317-3822 02 April 2024 Commodity Codes None Added 02 April 202402 April 202402 April 202402 April 202402 April 202402 April 202402 April 202402 April 202402 April 2024 mailto:ME-WILLIAMS@TAMU.EDU Invitation for Bid -Multiphoton Customized (MPC) Microscope Brand and model specified are for illustrative purposes only. Equivalents may be considered. If bidding an equivalent, vendor should provide the following: - Manufacturer, Model number, and a detailed specification sheet. Agency will have final determination on equivalency. Description

Required to View Event Prerequisites Required to Enter Bid 02 April 2024 1. Warranty- All items specified within this document must be warranted against defective materials, workmanship and failures for a minimum of twelve (12) months after delivery and acceptance. Warranty includes all parts and labor. 2. Export Control- Vendor must notify Texas A&M if any products are export controlled. Items not indicated as such shall be considered and treated as non-controlled items. 3. Federal Funding- All terms and conditions apply to this bid. Any resulting purchase order will be under a federal contract or grant administered by a state agency. 4. Shipping - FOB Destination Shipping to be FOB Destination: College Station, TX Shipping must be specified if not included in the item price(s). Shipping will not be allowed / approved if not specified in the bid response. 5. Equivalent Items Items specified on this invitation for bid are for illustrative purposes only. Any specifications listed are minimum specifications only and equivalent products may be considered. If bidding an equivalent, bidder shall include descriptive literature including model number and manufacturer with return bid response. Failure to do so may result in the disqualification of your bid. 6. TEES T&C's- As a vendor responding to this invitation upon submission of your response, regardless of the format of your submission, you and the entity you represent are agreeing to the terms and conditions presented here as well as the TEES terms and conditions. 7. Best Value - In addition to low price, agency will consider best value, which includes the following: *quality, availability, and adaptability of materials, supplies, or equipment required *scope of conditions attached to bid *ability, capacity and skill of bidder *prompt service, goods delivered within time allowed *character, responsibility, reputation, and experience of bidder *quality of performance of previous service *financial stability *ability to provide future maintenance, repair parts, and service 02 April 202402 April 202402 April 202402 April 202402 April 202402 April 202402 April 2024 Buyer Attachments There are no Buyer Attachments added to this event. 02 April 202402 April 202402 April 202402 April 202402 April 202402 April 2024 Questions Required Questions Group 1: Instructions: 1.1 Are any of the items on this invitation for bid Export Controlled? 1.2 If export controlled, provide any ITAR Categories or ECCNs that apply. 02 April 202402 April 202402 April 202402 April 202402 April 2024 Product Line Items Product Line Items 1. # Item Name, Commodity Code, Description Allow Alternates Qty. UOM Requested Delivery P1 Multiphoton Customized (MPC) Microscope 1 EA - Each 8/31/2024 41111722 - Fluorescent microscopes | 5751 $5k, 8422 Optimized for 2-photon and 3-photon imaging from 680nm to 1300nm and 1700nm *Upright configuration Key features: Large space under the objective. Super-large 2" fluorescence collection optics, achromatically compensated, enabling deep 3D & low-power imaging thus minimizing photo-bleaching and photo-toxicity. Beam size up to a Ø23 mm at back aperture objective for highest resolution multiphoton Imaging. Free space laser input port. 3 position motorized and software controlled objective turret, M32 x 075 threaded. Motorized and software controlled modality change. Integrated workspace illumination for easy sample navigation and monitoring. Supports a wide range of imaging modalities, like epi-fluorescence widefield, 2P, 3P, 4P, TD-FLIM, FD-FLIM, CARS, SRS. 2 pcs. high sensitive GaAsP PMTs with transimpedance amplifiers. Transimpedance amplifiers gain and bandwidth software controlled Galvo - Galvo type scan engine Mechanical interface supporting 60mm cage system for home-built add-ons in external laser beam line US keyboard, mouse, monitor, built-in high performane PC system- ScanImage, Chromogazer, ImageJ Environmental specifications: Air-cooled (might not apply for ordered laser system); single phase, 110V - 230V autoswitching, 20 A max; operating environment 18°C - 28°C; storage temperature -15°C to +50°C; humidity 10% - 90% (non condensing); noise level 70 dBa; altitude 2500 m max. System includes: 2 PMTs non-descanned epi direction - Hamamatsu H10770PA-40 2 PMT fluorescence filter cubes - Two filter cubes defined at the time of purchase *0 Objective - Objective supplied by user; system will be tested and manufacture certified with Olympus - N20X-PFH 1 Galvo - galvo scan system - 1.6 fps at 512 x 512 Pixels, 0.1 fps at 2048 x 2048 Pixels, Pixel dwell time: 0.8 to 32 microseconds. Field of view (FOV): >20 mm diagonal square (Max) at the intermediate image plane. Typically 0.7 mm x 0.7 mm by using the Nikon 20x objective. Beam diameter @ objective back aperture plane up to 23 mm 1 Software - Chromogazer (by Prospective Instruments) microscope control, diagnostics, modality change, etc. - fully script capable, source code available on request MBF / Vidrio ScanImage Premium MATLAB ImageJ Microsoft Windows 11 64-bit 1 PC & display ATX gaming mainboard, AMD Ryzen 9 3900X, 32 GB RAM DDR4, 500 GB SSD, Graphics card. Display 27“; Keyboard (QWERTY), mouse P2 Widefield epi fluorescence imaging 1 EA - Each 8/31/2024 41111722 - Fluorescent microscopes | 5751 $5k, 8422 Widefield single photon fluorescence imaging includes: Illumination source (white light) Fully integrated white light illumination engine Spectral coverage 385 nm - 730 nm Output power >3W White light collimator P3 LaserCron3P 1 EA - Each 8/31/2024 42183058 - Visual field laser instrument | 5751 5k, 8422 02 April 202402 April 202402 April 202402 April 2024 Stand-alone ultrafast laser for 3P, 4P, 5P, SHG & THG (works also for 2P@1250nm): Tuning range: 1250 - 1800 nm Repetition rate: Single-shot to 1 MHz / 2 MHz Pulse duration: 50 fs@1300 nm, 65 fs@1700 nm Output power @ 1300nm: > 1100 mW @ 1 MHz, > 800 mW @ 2 MHz Output power @ 1700nm: > 800 mW @ 1 MHz, > 500 mW @ 2 MHz Continuous GDD control range@1300nm: -4000 to +9000 fs2 Continuous GDD control range@1700nm: -12000 to +3500 fs2 Beam quality (M2) 1.2 Beam ellipticity > 0.8 Long-term power stability, 24 h: 1% Pulse-to-pulse energy stability: 1% Operating temperature: 19 - 25 oC (air conditioning recommended) Relative humidity: 20 - 70% (non-condensing) Electrical requirements: Laser 100V AC, 7A - 240V AC, 3A; 50 - 60 Hz Chiller 100 - 230V AC; 50 - 60 Hz P4 FSX optimized for 2p, CARS 1 EA - Each 8/31/2024 42183058 - Visual field laser instrument | 5751 5k, 8422 FSX optimized for 2p, CARS Wavelenght tunable, dual-line ultra-low noise fs laser optimized for fast 2p, CARS and SRS imaging. 100 MHz pulse repetition rate. >600 mW @765 - 935 nm & >1000 mW @1030 nm. 140 fs pulse duration at tunable and fixed laser line. Built-in tunable GDD precompensation across full wavelength range, supporting 140fs at the sample. Ready for label-free CARS imaging by spatial and temporatel overlap of tunable and fixed laser line (laser alignment and opto-mechanics not included, field upgrade) Ready for label-free SRS imaging, requires extra electronics (not included, field upgrade). P5 FLIM Labs - LSM Upgrades 1 EA - Each 8/31/2024 41111722 - Fluorescent microscopes | 5751 $5k, 8422 FLIM-Phasors for a graphical representation (phasor plot) of the lifetime distribution. TCSPC based FLIM acquisition - System includes: - Turn-key FLIM imaging, integrated into MPC controller and front-end. - FLIM STUDIO acquisition and analysis software, incl API for own software extensions. - Built-in FLIM data acquisition card: 300 ps single-shot precision 48 ps minimum time bin resolution 1.5 ns deadtime 80MHz Max laser sync rate 0.5% rms differential non-linearity Transfer rate up to 100 M counts/s Peak count rate per input channel up to 640 Mcounts/s 11 SMA single-ended input for LVTTL 50 Ohm 1 SMA Laser trigger in (sync in) for LVTTL 50 Ohm signals 1 SMA Laser trigger out (sync out) LVTTL 50 Ohm for modulating external pulsed laser sources 13 USB-C LVDS input/output configurable - Single-photon sampling capabilities gives access to plenty of information and allows to perform a large variety of techniques such as Fluorescence Correlation Spectroscopy (FCS), Fluorescence Resonance Energy Transfer (FRET), Near Infrared Spectroscopy (NIRS). P6 Installation and Training 1 EA - Each 8/31/2024 Three full-days installation and training by a manufacturers engineer to occur at customer location and timely coordinated within 30 days of delivery. P7 Shipping 1 EA - Each Shipping costs must be included in the prices listed above or here as a line item. If shipping charges are not included in your bid, they will not be paid. Shipping must include all applicable customs, duties and fees if there are any. 02 April 202402 April 202402 April 202402 April 2024 Service Line Items Service Line Items There are no Items added to this event. 02 April 202402 April 202402 April 2024