42--Engine equipment and supplies

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is MLS2100005 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 423490 with a small business size standard of 150.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids.The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at

target="_blank">www.UnisonMarketplace.com, will end on:2021-08-11 15:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.FOB Destination shall be Redstone Arsenal, AL 35898The ACC - Redstone Arsenal End User requires the following items, Brand Name or Equal, to the following:LI 001: Milwaukee M18 FUELTM 16" Chainsaw Kit, The Milwaukee® M18 FUELTM 16" Chainsaw delivers the power to cut hardwoods, cuts faster than gas, and delivers up to 150 cuts per charge. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance, power utility, and the installed M18TM user. The POWERSTATETM Brushless Motor maintains speed under heavy loads without bogging down to outperform small gas engines and higher voltage systems. REDLINK PLUSTM intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18TM REDLITHIUMTM HIGH OUTPUTTM HD12.0 battery delivers unmatched run-time in all applications. M18 FUELTM technology allows the unit to reach full throttle in under 1 second providing ultimate control and productivity. Includes (1)M18 REDLITHIUMTM HIGH OUTPUTTM HD12.0 Battery Pack 48-11-1812) (1)M18TM & M12TM Rapid Charger (48-59-1808) (1) 16" Oregon Bar and Chain (1) Scrench, 5, EA;LI 002: M18 FUELTM 9" Cut-Off Saw w/ ONE-KEYTM Kit Our M18 FUELTM 9" Cut-Off Saw w/ ONE-KEYTM Kit is an extremely versatile solution for cutting a large variety of materials. The cordless cut off saw runs on our MILWAUKEE® M18TM REDLITHIUMTM batteries instead of using gas like most traditional cut off saws. The cut off saw delivers you the Power To Cut Reinforced Concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being Up To 50% Lighter Than Gas demo saws that are in the market today. By utilizing our M18TM REDLITHIUMTM HIGH OUTPUT HD12.0 Battery, the saw also ensures you will experience No Gas Headaches. The concrete cutting saw produces no fumes so you can use it indoors. It also starts up instantly, eliminates your need to mix gas and oil, and there is no gas engine maintenance. The M18TM battery will also work on any of our other 200+ M18TM solutions. The M18 FUELTM 9" Cut-Off Saw also has ONE-KEYTM integrated so you can wirelessly connect the tool with your smartphone to track and manage the tool. In addition to the tool, this kit includes two M18TM REDLITHIUMTM HIGH OUTPUT HD12.0 Batteries and an M12TM & M18TM Rapid Charger. (1)M18 FUELTM 9" Cut-Off Saw w/ ONE-KEYTM (2786-20) (2)M18 REDLITHIUMTM HIGH OUTPUTTM HD12.0 Battery Pack (48-11-1812) (1)M18TM & M12TM Rapid Charger (48-59-1808) (1)Diamond Premium Segmented Blades (Diamond-Premium-Segmented-Blades) (1)9" X 3/32" X 7/8" Metal Cut-Off Wheel (49-94-9000) (1) Wrench (1) Hex Wrench, 5, EA;LI 003: 20" PPV Variable-Speed Battery Fan - Milwaukee Battery Fan kit with 2 12 AH batteries and chargers and shore power. Compact, Roll-Cage Frame: Features a tough yet lightweight aluminum frame to protect key components while providing a compact, lightweight design Fold-Down Ergonomic Handle: Folds into the frame for compact storage; features full-width handle for easy grip with heavy-duty gloves Flat-Proof Rubber Tires with Skid Plates: Highly maneuverable, even on stairs, and all without lifting the fan; easy to deploy by all firefighters. 180-Degree Tilt: Provides the largest tilt range among battery fans, allowing airflow to be directed virtually anywhere Fan Features Milwaukee Red Lithium 18V batteries: Batteries provide up to 50 minutes of run time, depending on battery selection; 120-240V AC operation is standard (with optional delete). Polymer Blade: Minimizes weight; Super Vac’s single-piece cast aluminum blade is available by request Precision-Spun Steel Shroud with StreamShaper Guard: Shroud provides durability with max airflow, while the StreamShaper guard allows for flexible setback; Air Cone Guard available by request Specifications Motor: Totally Enclosed Variable-Speed DC Power: 1 HP Speed: 2,150 rpm Output: 12,500 cfm (21,237 cmh) Dimensions: 28.75” x 28.25” x 12.5” (730mm x 718mm x 318mm) Weight: 60 lbs. (27 kg) (Weight with batteries and shore power.), 3, EA;LI 004: Fluke Clamp on Digital Clamp Meter Clamp on Digital Clamp Meter, 14 degrees to 752 degree Fahrenheit temp range, 1.1 inch jaw capacity, CAT III 600V, C. Mfr. Model FLUKE-324, 1, EA;LI 005: Mfr. Model # Fluke-1AC-A1-II Voltage Detector, 5 In. L, 90 to 1000VAC, 3, EA;LI 006: FatMax® Extreme FuBar III Hydrant wrench included in design. 30” of engineered destructive power 8.5 lb total weight, precisely balanced for maximum striking power Sledge hammer face Ripping hook One piece forged steel construction Textured grip for excellent control and comfort Nail puller and pry bar, 7, EA;LI 007: Sprinkler Head Shut Off Tool. SHUTGUN or similar. Cast Aluminum, Yellow Finish, Hydrostatic Test Pressure up to and including 9 BAR, Pnuematic Pressure Test up to and including 10 BAR, Activation Temperature 164F, Tool is for 1/2 heads, 7, EA;LI 008: Darley 2.5” Hydrant Gate Valve or similar. All aluminum hydrant gate valve with resilient seat design. Includes a corrosion resistant stainless steel stem with an aluminum wedge with full flow water output. All aluminum parts are hard coated before powder coating to improve corrosion resistance. Opening/closing takes 12 turns of the hand wheel meeting NFPA requirements to prevent water hammer. 21/2" NH female swivel x 21/2" NH male., 8, EA;LI 009: Green in color, 1 3/4 inch, HIGH COMBAT II Firefighting Hose, Must match current equipment to provide continuity in operations and training. Service pressure 500 psi, test pressure 1000 psi, burst pressure 1500 PSI. 50 foot sections. Hi-Combat II is manufactured to meet or exceed the NFPA 1961 standard. Ensures it will not burst catastrophically — even with a 1/2” diameter hole through both the jacket and liner. Kink resistance exceeds that of conventional jacketed hose., 4, EA;LI 010: Red in color, 1 3/4 inch, HIGH COMBAT II Firefighting Hose, Must match current equipment to provide continuity in operations and training. Service pressure 500 psi, test pressure 1000 psi, burst pressure 1500 PSI. 50 foot sections. Hi-Combat II is manufactured to meet or exceed the NFPA 1961 standard. Ensures it will not burst catastrophically — even with a 1/2” diameter hole through both the jacket and liner. Kink resistance exceeds that of conventional jacketed hose., 4, EA;LI 011: Blue in color, 1 3/4 inch, HIGH COMBAT II Firefighting Hose, Must match current equipment to provide continuity in operations and training. Service pressure 500 psi, test pressure 1000 psi, burst pressure 1500 PSI. 50 foot sections. Hi-Combat II is manufactured to meet or exceed the NFPA 1961 standard. Ensures it will not burst catastrophically — even with a 1/2” diameter hole through both the jacket and liner. Kink resistance exceeds that of conventional jacketed hose., 3, EA;LI 012: Yellow in color, 1 3/4 inch, HIGH COMBAT II Firefighting Hose, Must match current equipment to provide continuity in operations and training. Service pressure 500 psi, test pressure 1000 psi, burst pressure 1500 PSI. 50 foot sections. Hi-Combat II is manufactured to meet or exceed the NFPA 1961 standard. Ensures it will not burst catastrophically — even with a 1/2” diameter hole through both the jacket and liner. Kink resistance exceeds that of conventional jacketed hose., 3, EA;LI 013: Orange in color, 1 3/4 inch, HIGH COMBAT II Firefighting Hose, Must match current equipment to provide continuity in operations and training. Service pressure 500 psi, test pressure 1000 psi, burst pressure 1500 PSI. 50 foot sections. Hi-Combat II is manufactured to meet or exceed the NFPA 1961 standard. Ensures it will not burst catastrophically — even with a 1/2” diameter hole through both the jacket and liner. Kink resistance exceeds that of conventional jacketed hose., 2, EA;LI 014: Yellow in color, 3 inch supply hose. Service 300 psi, proof 600 psi, Burst 900 psi. Inner Hose Cover & Liner Nitrile/PVC Rubber, 50 foot lengths. Threaded couplings. Superior efficiency on the fireground, delivering more GPM with lowest friction loss. Smooth inner liner keeps friction loss to a minimum. Hose is protected from catastrophic bursts, even with a 1/2” diameter hole through both the jacket and liner. Exceeds Standards. Hi-Vol is manufactured to meet or exceed NFPA 1961 standard., 16, EA;LI 015: Hose Size - 5.0 inches -- Color RED. Hose Length - (100 FOOT) Couplings - Locking Aluminum 5.0inch Storz Connecting Type - Sexless Hose Type - Nitrile / PVC Through-The-Weave Color - Yellow Weight Per Foot - 1.09 pounds Approximate Width Laying Flat -7.75 inches Warranty - 10 Years Service Pressure - 225 PSI Proof Test Pressure - 450 PSI Burst Test Pressure - 675 PSI UL Listed NFPA Compliant Supply Hose, 10, EA;LI 016: Gator FX Tonneau Cover GHF-8828207 or similar hard flip open tonneau cover. must fit 2019 Dodge Ram 1500 classic with 5 foot 7 inch standard bed., 2, EA;LI 017: Gator FX Tonneau Cover GHF-8828203 or similar hard flip open tonneau cover. must fit 2017 Dodge Ram 1500 classic with 6 foot 4 inch standard bed., 1, EA;LI 018: Yellow in color, 2 1/2 inch, HIGH COMBAT II Firefighting Hose, Must match current equipment to provide continuity in operations and training. Service pressure 500 psi, test pressure 1000 psi, burst pressure 1500 PSI. 50 foot sections. Hi-Combat II is manufactured to meet or exceed the NFPA 1961 standard. Ensures it will not burst catastrophically — even with a 1/2” diameter hole through both the jacket and liner. Kink resistance exceeds that of conventional jacketed hose., 4, EA;Solicitation and Buy Attachments***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, ACC - Redstone Arsenal End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. ACC - Redstone Arsenal End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award.Reporting During Contract PerformanceEqual Opportunity