From: Federal Government(Federal)
Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75′′-diameter cutter housing with 25mm (.98′′) diameter spindle shaft and splined blade driver.Drive Tires: 23 x 9.50-12, 4 ply Steering Control: Hydraulically dampened twin levers, adjust fore and aftFront Caster Tires: 13 x 5.0-6, smooth-tread, semi-pneumatic.Parking Brake: Lever-actuated disc brake.Electrical: 12-volt battery with 15-amp alternatorDeckWidth Cutting Deck: 60′′Deck Style: Floating DeckBlade Tip Speed: Approximately 18,500 fpm.Cutting Heights: 1.0′′ (2.5 cm) to 5.5′′ (11.8 cm) in 0.25′′ (0.64 cm) increments adjustable from operator’s seat.Blades: 3 Blades at 16.25′′ LengthPower ComponentsEngine Type: CarburetedEngine Speed: 3,750 rpmAir Filter: Heavy-duty canister air filtration systemFuel Type: Gas CarburetedFuel Indicator: Yes – electronic SenderDrive: Hydro-DriveDrive Description: unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motorsSpeed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.Carb Compliant: YesDeck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.Drive Wheel Release: Allows unit movement without engine running.Casters: .50′′ thick caster yoke